Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Selma, TX | Mason Remodeling Co San Antonio
We provide independent KraftMaid cabinet installation, refacing, and hardware repair across Selma, TX, from Olympia Hills to The Woods and the I-35 corridor, as your trusted General Contractor - Selma. The thing that sets our KraftMaid work here apart is that we know Selma’s HOA rules, clay-soil settling patterns, and post-hail repair landscape well enough to order the right parts and the right finish match the first time. You’re not getting a generic cabinet crew. You’re getting a crew that has corrected KraftMaid hinge binding and thermofoil peeling in homes built on Blackland Prairie clay without waiting on factory reps. Call (254) 269-5071 for a free estimate.
Why Selma Residents Choose Us for KraftMaid Service
KraftMaid builds cabinets in a few distinct lines, and each one has its own hardware spec and finish chemistry. We know Vantage, Passport, Venicia, and Wellington well enough to diagnose what’s failing before we touch a single door. Selma homeowners call us because we show up knowing whether a stripped hinge screw needs an oversized replacement or a new end panel, and because we order KraftMaid OEM hinges, glides, and fillers before we ever put a tool to the cabinet.
Isaac Pruett, our owner, learned construction fundamentals at Los Angeles Trade-Technical College and has spent two decades on jobs across the Southwest. When it comes to KraftMaid work in Selma, that experience means he can tell you, before the job starts, whether settling near Cibolo Creek is actually shifting your door reveals or whether the hinge was simply overtightened at install. We also sell and service KraftMaid through our KraftMaid sales & service work, so we’re familiar with the full product line, not just the failures.
Styles & brands we work with
Common KraftMaid Construction Problems We Solve in Selma
Here are the KraftMaid issues we see most often in Selma homes, and why they happen here specifically:
- Stripped hinge screws in particleboard end panels. Selma’s interior humidity swings from summer heat to winter dry spells, and production-built homes from the 2000s and 2010s often have particleboard end panels that eventually let hinge screws work loose. Repeated door adjustments strip the pilot holes. We replace with oversized screws or set a threaded insert and realign the door, then check every other hinge on that cabinet run.
- Thermofoil peeling along bottom edges near the dishwasher. Open-plan kitchens in Selma’s tract homes often vent dishwasher steam directly at adjacent cabinet doors. Thermofoil fronts on KraftMaid Vantage and Passport lines peel at the bottom edge in those conditions. We quote replacement doors or refacing rather than trying to glue the film back down, which never holds.
- Drawer glide brackets sagging under heavy pots. Base cabinets in Selma kitchens take real use. When glide brackets sag or pull loose from the case sides, it’s almost always a hardware failure, not a box failure. We replace the glide and remount the bracket into the cabinet side, checking the case for any prior damage.
- Melamine edge banding chipping at the sink base. Homes near Cibolo Creek sit over groundwater that keeps ambient humidity higher than areas farther west. Sink base cabinets absorb that moisture, and the edge banding chips where it’s most exposed. We strip the damaged banding and apply a matched edge band, then seal the exposed edges.
- Doors out of square after hail repairs or slab shifts. Selma sits on expansive clay that moves with rainfall and drought. Doors that lined up last spring may bind by fall. We see this all the time in Olympia Hills and other master-planned communities where slab movement is common. We adjust, realign, and sometimes rehang the door with a different hinge cup depth.
KraftMaid Service in Selma: What Local Conditions Mean for Your Equipment
Selma’s master-planned HOA communities like Olympia Hills and The Woods require cabinet and island changes to match existing finishes, and many projects need architectural committee approval before work begins. No other town in the Northeast San Antonio belt has as many HOA-governed, KraftMaid-heavy 2010s-era homes per square mile as Selma. That means when a homeowner needs a pantry cabinet added or an island wrapped to match existing Vantage doors, we pull the HOA spec sheet before we order anything. We match the finish profile and door style exactly, because the HOA reviewer will check. If you live in a Selma community with a design review committee, ask us to confirm the approval path before you commit to the work. It saves time and keeps the project moving.
KraftMaid Models & Products We Service in Selma
We install, reface, and repair every major KraftMaid line: Vantage, Passport, Venicia, and Wellington. That covers full-overlay, inset, and standard-overlay door profiles, plus the finish families that go with each line. We use KraftMaid OEM hinges, glides, and fillers whenever they’re available. For discontinued finishes or hardware where the OEM part is no longer in production, we substitute matched aftermarket parts from Blum or Salice and refinish to blend. On most Selma jobs we can pull a stripped hinge or a sagging glide and replace it from stock the same visit, because we keep common KraftMaid hardware on our trucks.
If you’re outside city limits, we extend the same service through our Selma service area coverage, including nearby ZIPs and the newer development pockets along the I-35 corridor.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Selma
Cabinet work prices depend on the scope: a single hinge replacement is a service call, while refacing a full kitchen is a project. Here’s the range for common KraftMaid jobs in Selma:
| Service | Price Range |
|---|---|
| Cabinet Installation (per KraftMaid kitchen) | $4,000 – $13,000 |
| Countertop Installation (quartz/granite with KraftMaid cabinets) | $2,000 – $6,500 |
| Kitchen Island Installation (KraftMaid base + top) | $3,000 – $10,000 |
| Backsplash Installation | $800 – $2,500 |
| Bathroom Vanity Installation (KraftMaid) | $800 – $3,000 |
Every job gets a written price before any work starts, so you know the number before we open the first box. Your free estimate includes the scope of work, the finish match, and what we’ll do if the HOA requires a revision. Call (254) 269-5071 to set one up.
Serving Selma, TX - Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Selma
My KraftMaid cabinet doors are no longer lining up in my Selma home. Is this from the clay soil?
It often is. Selma sits on expansive clay in the Blackland Prairie, and slab movement from seasonal wet and dry cycles shifts door reveals over time. We check the cabinet box and hinge mounts first. If the slab has moved, we adjust the hinges and sometimes rehang the doors to square. Call (254) 269-5071 and we’ll tell you what’s actually going on.
Can you reface my KraftMaid Vantage kitchen cabinets in a master-planned community without breaking HOA rules?
Yes, but only if we match the existing finish and door profile and follow the community’s approval process. We pull the HOA spec sheet for communities like Olympia Hills and The Woods before ordering doors or trim, and we submit for architectural review if the community requires it. Matching the look is the easy part. Getting the approval done right is the part most contractors skip, even on our Bathroom Remodeling in Selma.
My KraftMaid thermofoil drawer front is peeling near the dishwasher. Replace or reface?
Replace the drawer front or reface the entire run. Thermofoil peeling can’t be glued back permanently, and patching one drawer front leaves a visible seam. We quote replacement doors or full refacing based on how many fronts have failed and whether the finish can be matched. Call (254) 269-5071 for an exact quote.
Do you ever rebuild KraftMaid drawer boxes rather than replace the whole cabinet?
Yes, if the box is structurally sound. A sagging glide or a stripped bracket gets replaced, not the cabinet. If the drawer box itself is cracked or delaminating, we quote a new box matched to the existing door and finish. In Selma’s humidity swings, a solid box with new glides usually outlasts a cheap replacement.
Why do my KraftMaid hinges keep stripping in a house built in the 2010s?
The particleboard end panels on many KraftMaid lines from that era lose screw thread integrity after repeated adjustments, especially in Selma’s interior humidity swings. We set oversized screws or threaded inserts so the hinge has a fresh bite, and we test every door on that run. If the panel itself is compromised, we quote an end panel replacement. Call (254) 269-5071 and we’ll fix it the same visit if we can.
Service Areas Near Selma
We serve Selma and the surrounding Northeast San Antonio communities: KraftMaid service in San Antonio, KraftMaid service in Boerne, Cibolo, Terrell Hills, and Leon Valley. If your home sits in one of the newer developments along I-35, we cover those too.
Book Your KraftMaid Service in Selma Today
Know who’s coming, know what it costs, know it’s covered, that’s the whole job before the job starts. Call (254) 269-5071 and we’ll schedule your free estimate, written in full before any work begins.
Written by Isaac Pruett, Owner at Mason Remodeling Co San Antonio, serving Selma since 2004.
