Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Boerne, TX | Mason Remodeling Co San Antonio
We’re an independent KraftMaid service provider and General Contractor in Boerne, and our cabinets see things here that a warehouse showroom never will. Limestone dust, hard-water humidity, and remodel jobs where someone wants to keep the original boxes but fix everything else. If you own KraftMaid cabinets in Boerne and they’re showing their age, we can tell you honestly whether to repair, reface, or replace, and we’ll put the number in writing before we touch a screw. Call (254) 269-5071 for a free estimate.
Why Boerne Residents Choose Us for KraftMaid Service
We’ve been pulling KraftMaid cabinets apart and putting them back together long enough to know which model lines hold up in Hill Country conditions and which ones don’t. Isaac Pruett, our owner, spent two decades on job sites across the Southwest before leading our San Antonio and Boerne crews, and he’s seen every failure mode these cabinets can produce. We’re KraftMaid sales & service specialists in the truest sense: we know the Vantage thermofoil problem, the Venicia hinge pullout issue, and the Passport Series quirks that show up after ten years of Boerne summers. Because we’re independent, not tied to KraftMaid’s warranty network, we give you repair-or-replace guidance based on what’s actually in front of us, not what a manufacturer rep wants sold.
Styles & brands we work with
Common KraftMaid Construction Problems We Solve in Boerne
Here’s what we actually see in Boerne kitchens, week after week:
- Thermofoil peeling on Vantage door and drawer fronts. Boerne’s intense summer heat, especially in kitchens without climate-controlled garages or rooms with big south-facing windows, bakes the adhesive layer until the vinyl skin lifts and bubbles. We replace the fronts rather than trying to re-glue a finish that’s already failed.
- Swollen MDF core panels near dishwashers and sinks. Hill Country hard water means slow leaks and high humidity around the typical Boerne kitchen. KraftMaid’s MDF panels absorb that moisture and swell at the edges. We cut out the damaged panel, verify the leak is stopped, and install a sealed replacement.
- Hinge screw pullout in older Venicia face frames. Boerne homes frequently sit on limestone slabs that shift a fraction of an inch over decades. When cabinets rack even slightly, hinge screws work loose. Re-tightening just strips the hole wider. We drill, dowel, and re-hang with proper anchors so the door actually stays put.
- Stained or cloudy maple finish under windows. Boerne’s high UV exposure breaks down the top coat on maple KraftMaid doors that sit beneath uncovered windows. The finish clouds and yellows unpredictably. We refinish or replace the affected fronts and can recommend a UV-blocking film if the window stays bare.
- Racked base cabinets on settled limestone foundations. A slab that’s moved just a quarter inch can twist an entire run of base cabinets. Doors bind, drawers don’t line up, and the center stile bows. We level and shim the boxes, then rehang everything square.
KraftMaid Service in Boerne: What Local Conditions Mean for Your Cabinets
Boerne’s dark-sky ordinance changes how a KraftMaid kitchen gets built or refaced. It’s not a preference; it’s a code requirement. Under-cabinet task lighting has to be low-Kelvin, shielded, and directed downward, which means integrated LED channels tucked tight against the cabinet’s shadow line. On a new KraftMaid install, that’s manageable if you plan for it before the crown and fillers go up. But many older Boerne kitchens, especially Vantage kitchens from the early 2000s, were built before the rule with bulky surface-mount fixtures that don’t meet current code. Refacing those kitchens isn’t just a door swap; it’s routing a clean channel for low-Kelvin lights without chewing through the cabinet’s upper rail, which is why Boerne Bathroom Remodeling and kitchen projects alike need skilled planning. Off Ranger Creek Road, we reworked a Vantage island kitchen where the original 2011 install had settled on a limestone shelf. Four of six base cabinets were racked and the center stile was bowing. We pulled the island, shimmed the boxes level with composite plates, replaced the south-facing thermofoil doors that had delaminated from window heat, and re-hung the drawer banks with new soft-close slides. The owners kept their original granite, cut to the corrected overhang, and the island now passes a 4-foot level across the full run.
KraftMaid Models & Products We Service in Boerne
We service the full KraftMaid lineup in Boerne: Vantage, the discontinued but still very common Venicia line from the 2000s, Passport Series, and Custom in both full-overlay and inset configurations. For current production lines, we default to genuine KraftMaid doors, drawer fronts, hinges, and roll-out trays when they’re still available. For discontinued Venicia hardware, we source precise aftermarket glides and soft-close adapters that match the original drilling so you don’t end up with mismatched holes. If the cabinet box is sound, we reface or replace fronts. We don’t push full-gut replacements when half your kitchen can be saved.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Boerne
Knowing the number before we start is the whole point. Here’s what KraftMaid construction work typically runs in the Boerne area:
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Remodel | $14,000 – $45,000 |
Your exact price depends on the model line, the condition of the existing boxes, whether we’re refacing or replacing, and how much leveling the limestone slab under your kitchen demands. A free estimate includes a written, line-item price. No verbal ballpark that grows later. Call (254) 269-5071 and we’ll come out, take measurements, and hand you the number.
Serving Boerne, TX - Our Local Coverage Area
We’re based in the Boerne area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Boerne
In most Boerne homes, you can reface just the lowers. The key is whether the upper cabinets’ finish is also breaking down, because the south-facing sun and garage heat usually hit uppers and lowers differently. If your upper doors are solid, we replace the lower door and drawer fronts with new KraftMaid fronts or a matched thermofoil-free alternative, and you keep the existing boxes. Call (254) 269-5071 for a free assessment; we’ll tell you if the uppers can wait.
We level the boxes in place. We pull the affected run, shim the base with composite plates cut to the measured slab variance, re-anchor the cabinets, and re-hang the doors and drawers with new hardware. Inset cabinets are more tedious than overlay because every reveal has to be reset, but if the boxes aren’t delaminated or water-damaged, a full gut is almost never necessary. We’ve done exactly this on multiple Boerne slab homes.
Yes. We’re not tied to any builder’s supply contract. We can install KraftMaid cabinetry in new Boerne construction as long as it’s specified early enough that the rough openings and plumbing are set for the correct cabinet dimensions. If the builder has already framed and plumbed for a different line, we’ll need to verify the layout before you order. You can choose the cabinet line; we’ll make it fit and level properly on your limestone lot.
If the cabinet sides and back are still square, we repair it. We cut out the warped bottom panel, install a sealed replacement, and confirm the sink and supply lines aren’t leaking. In Boerne neighborhoods with high water table and hard water, the leak often comes from condensation on cold supply lines in summer, not a plumbing failure, so we’ll address that too. If the cabinet sides have swollen enough that the face frame is separating, replacement is the honest answer. Call (254) 269-5071 and we’ll tell you which one you’re looking at.
We route a shallow channel into the bottom of the upper cabinet rail or use a low-profile surface channel that meets Boerne’s dark-sky shielding requirements. The key is Kelvin rating and shielding, not how much space the fixture takes. Older Vantage cabinets usually have enough rail depth for a 1/2-inch recessed channel if we’re careful with the crown and fillers. If not, a shielded surface-mount strip tucked tight behind the cabinet’s front lip works. We’ll show you both options on your exact cabinet run before we cut anything.
Service Areas Near Boerne
From our base in the San Antonio area, we serve Boerne and the surrounding Hill Country and I-10 corridor communities. That includes Boerne service area proper, plus San Antonio, Selma, Terrell Hills, Cibolo, and Leon Valley. We also provide KraftMaid service in Selma and KraftMaid service in San Antonio for clients whose projects sit on the other side of the county line. If you’re within a reasonable drive of Boerne, call and we’ll tell you if we can make the trip work.
Book Your KraftMaid Service in Boerne Today
Every KraftMaid project in Boerne starts with a written price and a clear scope. Our crew members are background-checked, uniformed, and you get their name and photo before they arrive. Call (254) 269-5071 to schedule your free estimate. Know who’s coming, know what it costs, know it’s covered, that’s the whole job before the job starts.
Written by Isaac Pruett, Owner at Mason Remodeling Co San Antonio, serving Boerne since 2004.
