Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why San Antonio Homeowners Choose KraftMaid Construction
Mason Remodeling Co San Antonio provides independent San Antonio Kraftmaid service for construction, repair, and installation across the greater San Antonio area. We’re not a factory-authorized dealer, and we don’t pretend to be what that means is our recommendations come from decades of hands-on work on these cabinets, not from a corporate service script. If you own KraftMaid Vantage, Venecia, Passport Series, or Denali cabinets and something’s failing or you’re planning an install, call (254) 269-5071 and we’ll tell you straight what it takes to fix it right.
KraftMaid cabinets are a common sight in San Antonio kitchens and baths, showing up everywhere from 1990s starter homes on the west side to newer builds in Stone Oak and Alamo Heights, and we’ve also handled Kraftmaid in Boerne. The cabinet line has real strengths: solid construction options, a deep catalog of door styles and finishes, and drawer systems that hold up well when installed correctly. But after years of San Antonio heat and humidity swings, certain failure patterns repeat themselves. Gussets split. Thermofoil lifts. Hinge plates strip out of particleboard. We know these problems by sight because we’ve repaired hundreds of them.
As an independent KraftMaid service provider, we answer to the homeowner, not to a manufacturer’s parts quota or warranty department. That distinction matters when a factory rep would tell you to replace a whole cabinet run and we can show you a reinforcement fix that buys another decade of service for a fraction of the cost.
Why Trust Mason Remodeling Co San Antonio for Your KraftMaid Construction?
Isaac Pruett, our owner, grew up in Los Angeles and learned construction fundamentals at Los Angeles Trade-Technical College before spending twenty years swinging hammers across the Southwest. He’s been running San Antonio jobs for years now as a General Contractor, and he’s the kind of contractor who walks a kitchen, opens the problem drawer, and diagnoses the failure before the homeowner finishes explaining the symptom. That’s not bragging. It’s repetition.
Our crew knows KraftMaid’s dimensional quirks and finish tolerances because we’ve built and repaired enough of these cabinets to know where they fail. We understand how KraftMaid boxes are constructed, where the weight concentrates, and what San Antonio’s clay soil movement and hundred-degree summers do to cabinet geometry over time. A cabinet that worked fine for fifteen years can start binding in a single dry summer when the slab shifts under it. We see that pattern constantly, especially in post-tension slab homes on the north and west sides.
Every crew member who shows up at your door is background-checked, identity-verified, uniformed, and carries a photo ID badge. You get the technician’s name and photo before the visit. That’s the Threshold Standard, and it’s how we’ve operated since 2004 as part of the Threshold Group family of home-service companies. We also deliver a written price before any work starts, on every project, every time. No verbal estimate that grows on the final bill. Know who’s coming, know what it costs, know it’s covered, that’s the whole job before the job starts.
Styles & brands we work with
Common KraftMaid Construction Problems We Fix in San Antonio
- Drawer box corner gussets splitting in Passport Series vanities. Passport Series vanity drawers get slammed. Repeatedly. The wood glides take the abuse well, but the corner gussets where the drawer box sides meet the front and back panels eventually split under impact. In bathrooms with high humidity swings, the wood expands and contracts daily, which accelerates the split. We remove the damaged gusset, re-glue and clamp the joint, and often add a reinforcement block before reattaching the glide. In bad cases, we rebuild the drawer box to the exact KraftMaid dimension.
- Thermofoil peeling from door and drawer front edges. Early Vantage and Contractor line KraftMaid cabinets used thermofoil finishes that bond a vinyl layer to MDF. San Antonio’s humidity spikes, especially during spring and fall storms, push moisture into the MDF core. The thermofoil lifts at the edges first, then bubbles across the face. Once it starts, no amount of pressing it back down lasts. We replace the affected doors or reface them with a finish appropriate for our climate, and we’ll tell you honestly which paths make sense for your budget.
- Hinge plates stripping out of particleboard side panels. Full-overlay KraftMaid doors put constant tension on hinge screws driven into particleboard. Over time, the screw holes wallow out, the hinge plate loosens, and the door sags. We drill out the stripped holes, insert hardwood dowels or threaded inserts, and remount the hinge plate. If the side panel is too far gone, we’ll refit the cabinet with a reinforcement plate rather than trying to re-use dead material.
- Molding-on-door joints delaminating years before the finish wears. Raised-panel and applied-molding KraftMaid doors use glue joints between the molding and the door frame. Thermal expansion in San Antonio attics and unconditioned spaces during summer breaks those glue bonds. The molding separates while the finish still looks fine. We re-bond the joint with a flexible adhesive and clamp it properly, then touch up the seam. For doors where the delamination is widespread, replacement is often cheaper than chasing individual joints.
- Slide-out frames shearing rear cam locks in Vantage pantry cabinets. KraftMaid Vantage pantries with tall slide-out frames put serious lateral stress on the rear cam locks that hold the frame square. When one shears, the whole pull-out rack shifts and starts scraping the cabinet interior. We index a blind-corner reinforcement plate at the back rail and reset the drawer runner on new screws. This is a same-day fix that beats ordering an entire new cabinet bay.
KraftMaid Parts & Our Repair-vs-Replace Approach
We source exact-spec KraftMaid hinge bosses, extra-deep roll-out trays, and matching touch-up kits where OEM parts are available. When they’re not, or when the OEM part is backordered for months, we use quality aftermarket components that match the original dimensions and load ratings. For hinge hardware, that means matching the bore pattern and overlay exactly, not “close enough.” For drawer glides, it means matching the extension length and weight capacity so the drawer cycles the way KraftMaid designed it to.
But our first honest call is often a reinforcement or refit over attempting a failing repair. A drawer box with split gussets is a candidate for rebuild, not patching. A side panel with stripped hinge holes gets a dowel-and-insert fix, not bigger screws driven into crumbling particleboard. For many worn boxes, we recommend a mid-run reface swap instead of replacing a single part that just transfers stress to the next weak point. That’s the honest answer, and it saves San Antonio homeowners money over the long run. If you want an exact quote on your KraftMaid problem, call (254) 269-5071 and we’ll walk through what we see.
Here’s what KraftMaid work typically costs in San Antonio:
| Service | Price Range |
|---|---|
| Cabinet Installation (KraftMaid box installation) | $4,000 – $13,000 |
| Cabinet Refacing (Vantage or Passport Series) | $4,000 – $13,000 |
| Kitchen Island Installation with KraftMaid cabinets | $3,000 – $10,000 |
| Backsplash Installation (over KraftMaid cabinets) | $800 – $2,500 |
| Countertop Installation (quartz/granite over KraftMaid boxes) | $2,000 – $6,500 |
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We open the cabinet, pull the drawer, check the hinge plates, and measure the box for square. KraftMaid failures usually have a root cause that isn’t the obvious symptom. A sticking drawer might be a slab shift, not a bad glide.
- 2
Repair or install plan. We write the scope on paper with a fixed price before any work starts. That includes parts, labor, and the sequence. You know exactly what we’re doing and what it costs before tools come out.
- 3
Execution. We complete the repair or installation using OEM or exact-spec parts. For KraftMaid cabinet installations, we level and shim each box, check reveals between doors, and verify every drawer cycles cleanly before we call it done.
- 4
Testing and walkthrough. We cycle every drawer and door, check hinge tension, verify soft-close mechanisms engage, and walk the job with you. If something isn’t right, we fix it then, not on a callback.
- 5
Warranty. Every completed project carries a written guarantee with clearly stated terms. Our 365-Day Done Right Promise covers the work for a full year from the completion date. If something fails, we return at no charge. No dispute process, no conditions.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in San Antonio
We work on all major KraftMaid lines we encounter across San Antonio, including KraftMaid Construction in Selma, TX: Vantage (full-overlay, custom-order flexibility), Venecia (frameless European styling), Passport Series (semi-custom with stock lead times), and Denali (durable finishes and deeper drawer boxes). We also service older KraftMaid Contractor line cabinets still common in 1990s-era homes around Lackland and the Medical Center area.
For cabinet installation and refacing, we stock common hinge plates, drawer glides, cam locks, and touch-up kits locally, which means most KraftMaid repairs in San Antonio don’t wait on factory shipping. If a part isn’t on our truck, we can usually have it in hand within a few days.
We Also Service These Brands
Beyond KraftMaid, our crews install and service cabinets and surfaces from Cambria, Silestone, Kohler, and Toto. If you’re mixing KraftMaid boxes with Cambria quartz counters or Kohler fixtures, we handle the full scope so you’re not coordinating three different contractors on one kitchen.
FAQs – KraftMaid Construction Service in San Antonio
Yes, in most Vantage configurations, we can retrofit soft-close glides into the existing drawer box openings without touching the door faces. The key is matching the glide length and mounting position to the original hardware. On some older Vantage units with non-standard drawer depths, we may need to shim the glide runners to keep the drawer face flush with the cabinet front. Call (254) 269-5071 for an exact assessment of your drawer setup.
The bubbling you’re seeing is thermofoil delamination, and it happens when moisture penetrates the MDF core beneath the vinyl finish layer. San Antonio’s humidity swings are the primary trigger, especially if the cabinets are near a dishwasher, sink, or exterior wall. Once thermofoil lifts, it won’t re-bond permanently. We typically recommend replacing the affected doors or refacing them with a finish that tolerates our climate. Call (254) 269-5071 and we’ll come out and tell you which doors are salvageable and which aren’t.
Yes. Passport Series finishes are consistent enough across production runs that we can order matching doors and boxes in most standard colors. For older installations where the finish has sun-faded or ambered, we use a stain match and glaze technique on the new cabinet so it sits alongside the existing run without looking like an add-on. That color matching is part of the installation, not an upsell.
In most cases, yes. For granite or quartz overhangs up to about twelve inches on KraftMaid island bases, we can install concealed steel supports inside the cabinet structure itself, or use hidden countertop brackets recessed into the substrate. The method depends on the overhang depth, the stone weight, and the cabinet layout. For deeper overhangs, visible corbels or posts may be necessary for safety, and we’ll tell you that plainly before you buy stone. Call (254) 269-5071 for a site assessment.
The hinge screws are stripping out of the particleboard side panel. KraftMaid full-overlay doors concentrate stress on those screws, and particleboard eventually loses its grip. The permanent fix is drilled-out screw holes, hardwood dowels or threaded inserts, and remounted hinge plates. Just driving larger screws into the same holes makes the problem worse. We do this repair regularly across San Antonio, and it usually takes under an hour per door.
KraftMaid cabinet installation in San Antonio typically runs $4,000 to $13,000 depending on the number of boxes and scope. Refacing a Vantage or Passport Series kitchen lands in the same range, $4,000 to $13,000. A kitchen island installation with KraftMaid cabinets runs $3,000 to $10,000. These are real ranges we quote from, not bait numbers. Call (254) 269-5071 for a written line-item quote on your specific project.
Book Your KraftMaid Service in San Antonio, TX
If you own KraftMaid cabinets and something’s not right, or you’re planning a KraftMaid install in San Antonio, call (254) 269-5071. We’ll schedule a visit, diagnose the issue, and put a written price in your hand before any work starts. Free estimates, no pressure, and a live person answers the phone.
Written by Isaac Pruett, Owner at Mason Remodeling Co San Antonio, serving San Antonio since 2004.
