Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why San Antonio Homeowners Choose Dvele Construction
Dvele homes in San Antonio aren’t standard stick-frame construction. They’re precision-built steel and cross-laminated timber envelopes with integrated smart systems, and remodeling one without understanding how those systems connect is how you end up with sagging cabinets, tripped sensors, and moisture problems nobody catches until the damage is done. We’re an independent Dvele in San Antonio service provider, not a factory-authorized shop, but our crews have spent years working inside these homes across San Antonio, learning the tolerances and failure points that generic remodelers miss. Whether you need a full kitchen rebuild, a tub-to-shower conversion, or cabinet refacing, we’ll give you a written price before any work starts and back it with our 365-Day Done Right Promise. Call (254) 269-5071 to schedule your free estimate.
This page is the resource we wish existed when we started taking Dvele jobs. It covers what actually fails in these homes, what parts we use and why, and what service costs in San Antonio, so you can decide what’s worth fixing before you ever pick up the phone.
Why Trust Mason Remodeling Co San Antonio for Your Dvele Construction?
Dvele builds homes differently, and that difference shows up the moment you open a wall. Steel studs instead of wood. Cross-laminated timber panels instead of plywood sheathing. Sensor bundles routed through every chase. A remodeler who treats a Dvele home like any other house is going to anchor cabinets into 20-gauge metal and call it done. Six months later, you’ve got an upper cabinet run pulling away from the wall and a smart home dashboard throwing alerts nobody can explain.
We’ve done the tear-outs. We’ve seen the strip-outs. We know that a standard drywall anchor doesn’t hold in a steel channel, that Dvele IQ wiring chases don’t forgive sloppy re-routing, and that a fiberglass shower pan bonded to the slab needs a specific membrane continuation if you’re converting to a walk-in. That field knowledge is what Isaac Pruett, our owner, demands on every Dvele job. Isaac trained at Los Angeles Trade-Technical College and spent two decades swinging hammers across the Southwest before he and our crew started taking San Antonio jobs, from gut renovations near the King William Historic District to kitchen rebuilds in quiet neighborhoods across the city, including Boerne Dvele service calls. He’s the one who insists we get the scope of work right before the first tool comes off the truck, because Dvele homes don’t forgive change orders halfway through.
We’re an independent Dvele service provider, and we’re transparent about that. No factory badge, no “authorized” claims. What we offer is experience, written pricing, and a guarantee stated in plain English.
Key Takeaways
- We work on Dvele homes across San Antonio as an independent provider, with field experience from actual tear-outs and tie-ins.
- Every Dvele project gets a written price before work starts, not a verbal estimate that grows later.
- Our 365-Day Done Right Promise covers the work for a full year from the completion date.
- Every crew member is background-checked, identity-verified, and arrives in a clean marked uniform with a photo ID badge you see before the door opens.
Styles & brands we work with
Common Dvele Construction Problems We Fix in San Antonio
Dvele homes are well-engineered, but San Antonio’s climate and soil put stress on them in ways the factory didn’t design around. Here are the problems we see most often when we’re called out to a Dvele home in this area:
- Upper cabinet runs separating from steel studs. This is the single most common Dvele failure we see in San Antonio kitchens. The original install often uses standard drywall screws into 20-gauge steel channel, which strips under the load of a loaded cabinet box. We’ve pulled entire upper runs off walls in Terrell Hills and Alamo Heights where the boxes were hanging by a thread. The fix isn’t more anchors; it’s sistered blocking behind the finished wall and proper structural fasteners.
- Dvele IQ sensor conflicts during kitchen and bath remodels. The Dvele IQ Smart Home Platform routes sensor bundles through walls and chases we have to work around when we open up a space. Cut the wrong wire or move a sensor without planning, and you trigger false alerts or kill a zone of the energy dashboard. We sequence our work carefully: identify the bundles before demo, re-fasten them with their original clips, and test the system before we close the wall.
- Fiberglass-reinforced shower pans bonded to the slab causing hidden moisture wicking. When homeowners want a tub-to-shower conversion in a Dvele bathroom, the original pan often comes up as a bonded fiberglass unit. If the membrane isn’t continued properly at the transition, moisture wicks into the CLT panel and you won’t see the damage until mold or delamination shows up months later. We use Schluter waterproofing and verify the membrane continuity before any tile goes down.
- Standing-seam metal roof penetrations failing at the gasket. Dvele roofs use factory-gasketed penetrations that work great until a homeowner needs a new HVAC vent or someone adds a bathroom fan. Off-the-shelf flashing doesn’t match the profile, and that’s when you get leaks. We use EPDM or TPO boots matched to the specific standing-seam profile, because a mismatched boot is a leak waiting for the next San Antonio downpour.
- Steel stud and CLT wall assemblies rejecting standard anchors. This shows up when homeowners or handymen try to hang a TV, floating shelf, or pot rack. The anchor strips the steel channel, the fixture sags or falls, and the wall is left with a hole that’s harder to repair than in drywall. We use Fastmount panel clips and specialized anchors rated for steel framing, and we’re happy to tell you exactly which ones work before you drill.
None of these are factory defects. They’re stress points that emerge when a home built for one set of conditions meets San Antonio’s heat, clay soil movement, and the normal wear of daily life. Knowing which is which is what saves you money.
Dvele Parts & Our Repair-vs-Replace Approach
We don’t automatically reach for the most expensive fix, and we don’t patch things that need real replacement. Our rule on Dvele homes is simple: use Dvele-compatible OEM-like components when the home’s automation envelope or structural integrity demands it, and use proven commercial-grade aftermarket parts everywhere else.
Sealing boots for standing-seam metal roofs, sensor mounts for the Dvele IQ platform, and structural anchors rated for steel channel: those are areas where we stick with components that match Dvele’s engineering. You don’t save money by putting a generic roof boot on a factory-gasketed penetration and hoping it holds. But for waterproofing, we use Schluter products without hesitation. For panel mounting, Fastmount clips have proven themselves on dozens of Dvele jobs across San Antonio. They’re better than what the factory specified in some applications, and they cost less.
When a steel-framed Dvele cabinet run has failed from strip-out, the honest fix is new blocking behind the wall and refaced boxes, not another round of anchors that’ll fail the same way in a year. That’s the repair-vs-replace conversation we’ll have with you in plain language, with a written price either way. Call (254) 269-5071 and we’ll come look at what you’ve got before we quote anything.
Our Dvele Service Process – Step by Step
Here’s what happens when you call us for Dvele work in San Antonio. This process exists so you know exactly who’s coming, what it costs, and what’s covered, before we touch anything.
- 1
Diagnosis and scope. We come out, look at the actual condition of your Dvele home, and identify what’s failing and why. If it’s a cabinet pull-away, we check the studs. If it’s a shower conversion, we check the slab and the membrane. We write the scope of work down and put a price on it in writing.
- 2
Repair or install. The crew arrives in clean marked uniforms, each member introduced by name and photo before the visit, photo ID badge at the door. For Dvele work, we sequence the job around the home’s smart systems and structural assembly, so we’re not fighting the house while we fix it.
- 3
System test and verification. On Dvele homes especially, we test before we close up: Dvele IQ sensors re-checked, energy dashboard green, roof penetrations water-tested if applicable, membrane continuity confirmed on shower work.
- 4
Warranty and follow-up. Every completed project is covered by a written guarantee with clearly stated terms: what’s covered, what’s excluded, and for how long. If something fails within 365 days from the completion date, we make it right at no cost to you. A free return visit is provided at no charge if a repair or installation fails.
See the difference
Before
After
Before
After
Before
AfterDvele Products We Service & Install in San Antonio
We work across the Dvele product lines that show up in San Antonio homes:
- Dvele IQ Smart Home Platform: sensor re-routing, system testing, and remodel sequencing that keeps the dashboard green.
- Dvele Steel Framing System: structural anchoring, blocking installation, and cabinet mounting on steel channel.
- Dvele CLT (cross-laminated timber) Panel System: moisture barrier continuity, membrane integration, and penetration sealing.
- Dvele True Zero Energy Series: remodel work that preserves the thermal and air-sealing envelope, including roof penetration work on standing-seam metal roofs.
We keep common failure parts in local stock for fast turnaround: EPDM and TPO boots for standing-seam profiles, steel-rated anchors, Fastmount clips, and Schluter waterproofing components. What we don’t stock, we can typically source within days through our San Antonio supplier network.
We Also Service These Brands
General Contractor expertise is one piece of how we serve San Antonio homeowners. The same crews run full kitchen remodels with KraftMaid cabinetry, install Cambria and Silestone countertops, and spec Kohler fixtures on bathroom projects. If your Dvele home has a mix of materials from different manufacturers, which most do, we handle the whole scope without bouncing between specialists.
FAQs – Dvele Construction Service in San Antonio
Dvele kitchens are framed with steel studs, not wood. The original installation often uses standard drywall screws into 20-gauge channel, which strips under the weight of a loaded cabinet. The fix is not more anchors; it’s solid blocking installed behind the finished wall and proper structural fasteners rated for steel framing. We’ve repaired this exact failure in kitchens across San Antonio, including in Terrell Hills, Alamo Heights, and Dvele Construction in Selma, TX. Call (254) 269-5071 and we’ll come assess whether your cabinets can be re-secured or need refacing.
Yes, if it’s done in the right order. Dvele shower pans are often fiberglass-reinforced units bonded directly to the slab. The critical step is continuing the waterproofing membrane properly at the transition, because a gap there lets moisture wick into the CLT panel and cause damage you won’t see for months. We use Schluter waterproofing and verify membrane continuity before any tile goes down. This is a common San Antonio remodel request, and we’ve done it without compromising the home’s envelope.
Yes. Dvele standing-seam roofs use factory-gasketed penetrations, and when you add or replace a vent, HVAC line, or bathroom fan, off-the-shelf flashing won’t match the profile. We use EPDM or TPO boots matched to the specific seam geometry, because a mismatched boot leaks at the first hard rain. The intense San Antonio UV also degrades generic rubber boots faster than in cooler climates, so the material choice matters more here. We keep these boots in local stock for fast turnaround.
It changes the sequencing. The Dvele IQ Smart Home Platform routes sensor bundles through walls and chases, and cutting or moving a sensor without planning triggers false alerts or kills a zone of your energy dashboard. We identify the bundles before demo, re-fasten them with their original clips, and test the system before closing the wall. Your home’s automation should still work the day we leave, same as it did the day we arrived.
In most cases, yes, and it’s often the smarter move. If the cabinet boxes are square and the failure is just the upper run pulling away from the steel studs, we can sister in blocking, re-secure the boxes, and reface the doors and drawer fronts to match your kitchen. You get a new look at a fraction of full replacement cost. We recently did a job on a Dvele True Zero Energy Series home in Terrell Hills where the upper cabinets had separated from the steel studs: we pulled the unsupported boxes, added solid blocking behind the finished wall, refaced everything to match the quartz counters, and re-fastened the Dvele IQ wiring with its original clips. The homeowner’s energy dashboard stayed green through the whole project. Cabinet refacing typically runs $4,000 to $13,000 in San Antonio, while a full kitchen remodel runs $14,000 to $45,000.
Here are the market ranges for the Dvele-related services we most often provide in San Antonio. Your exact price depends on your home’s specific condition, access, and scope, but these numbers give you a realistic starting point before you call:
| Service | San Antonio Price Range |
|---|---|
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Cabinet Installation & Refacing | $4,000 – $13,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
These are written-price projects, which means the number we quote you is the number you pay. No surprise invoices, no change orders you didn’t approve in writing. Call (254) 269-5071 for an exact quote on your Dvele home; estimates are free.
Book Your Dvele Service in San Antonio, TX
Know who’s coming, know what it costs, know it’s covered. That’s the whole job before the job starts. Call (254) 269-5071 to schedule your free Dvele estimate in San Antonio. We’ll put the scope in writing, the price in writing, and the guarantee in writing. Then the work speaks for itself.
Written by Isaac Pruett, Owner at Mason Remodeling Co San Antonio, serving San Antonio since 2004.
