Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in Selma, TX | Mason Remodeling Co San Antonio
We provide independent Dvele construction service across Selma, TX, handling everything from envelope panel repairs and roof membrane replacement to smart-home mechanical rough-in and full remodels. What makes our Dvele work different here is simple: we plan every panel fit, joint seal, and mechanical rough-in around Selma’s Blackland Prairie clay, which swells over four inches between dry and wet seasons. That’s nearly double the movement you’d see ten miles south in San Antonio’s limestone zones, and it changes how Dvele’s fixed-dimension panels have to be fitted. We’re Mason Remodeling Co San Antonio, led by Isaac Pruett, and you can reach us at (254) 269-5071 for a free estimate.
Why Selma Residents Choose Us for Dvele Service
Dvele homes are not standard production builds. They’re precision-engineered envelope panels, integrated smart-home systems like Dvele IQ, and continuous-insulation wall assemblies that demand sequencing and materials most Selma General Contractor teams don’t stock and don’t understand. We do. Our crews have worked on Dvele Origin, Dvele Balance, Dvele IQ, and Dvele Duo models throughout the Northeast San Antonio development belt, and we know where these systems fail in this climate. Isaac Pruett spent two decades swinging hammers across the Southwest before bringing his crews to San Antonio jobs, and his approach with Dvele work is the same as any other: know who’s coming, know what it costs, know it’s covered. That’s the whole job before the job starts.
Every technician who arrives at your Selma home is background-checked, identity-verified, in a clean marked uniform, and holding a photo ID badge. You receive that technician’s name and photo before the visit, so there are no strangers at your door. We call this the Threshold Standard, and it applies to every Dvele job we run in Selma, whether it’s a hail-damaged roof membrane near Cibolo Creek or Bathroom Remodeling - Selma work in a 2020s production home off Evans Road.
We’re an independent Dvele service provider. We’re not manufacturer-affiliated and we’re not an authorized factory service center. That independence matters because we source factory-equivalent panel joint sealants, smart sensors, and mechanical components from Dvele’s specified vendors or certified aftermarket equivalents that meet their performance specs. You get the right parts without factory wait times. Our broader Dvele sales & service work spans the entire San Antonio metro, which keeps our parts pipeline full and our crews sharp.
Styles & brands we work with
Common Dvele Construction Problems We Solve in Selma
- Hairline stress cracks at panel joints and corner seams. Selma’s expansive clay shrinks and swells with the seasons, and Dvele’s continuous-insulation wall panels are rigid by design. That combination produces hairline cracks at panel joints and inside corners, especially in homes built on the Blackland Prairie’s deeper clay pockets. We re-seal those joints with Dvele-spec sealant and verify the crack isn’t telegraphing structural movement beyond normal slab heave.
- Hail punctures in low-slope membrane roofs. Spring hailstorms roll through Selma with regularity, and Dvele’s low-slope TPO membrane roofs take the hit. Punctures let water wick into panel joints below, and UV degradation accelerates membrane brittleness once the surface is compromised. We inspect, patch, or replace membrane sections to Dvele spec before the damage reaches the wall assembly.
- Condensation at panel-to-window transitions. Selma’s humid summers push hot, wet air against cool interior surfaces, and Dvele’s panel-to-window transitions are a common condensation point that triggers concealed moisture alarms on the Dvele IQ monitoring system. We re-tape these transitions with the factory tape and verify the flashing detail before the alarm becomes a mold problem.
- Powder-post beetle entry through unsealed penetrations. Homes near Cibolo Creek’s greenbelt carry a specific risk. Powder-post beetles enter through unsealed penetrations into Dvele’s lumber-framed panel cores, and by the time you see the frass, they’ve been working a while. We open the affected panel segment, treat the core, replace damaged lumber, and seal the penetration properly.
- Smart-home mechanical rough-in conflicts. When Selma homeowners want to move a wall, add a kitchen island, or convert a garage, Dvele’s integrated wiring and sensor routing has to be planned before demo starts. We map the existing rough-in and sequence the mechanical work so the Dvele IQ system stays calibrated through the build.
Dvele Service in Selma: What Local Conditions Mean for Your Equipment
Selma sits on the eastern edge of the Texas Hill Country where the Blackland Prairie’s dark, shrink-swell clays dominate. Those clays can swell over four inches between a dry August and a wet spring, which means Dvele’s fixed-dimension wall panels are riding ground that literally changes volume underneath them. Ten miles south in San Antonio’s limestone bedrock zones, the movement is half that. Here in Selma, our crews pre-plan for slab heave when fitting Dvele panels, leaving engineered relief at joint lines and selecting sealants that tolerate repeated stretching without failing. This is also why we recommend homeowners in the older neighborhoods near the Cibolo Creek floodplain, where differential settling is most pronounced, have their Dvele envelope joints inspected every two years. A hairline crack at a corner seam today is a moisture alarm tomorrow. For the full picture of how we serve this area, see our Selma service area coverage.
Dvele Models & Products We Service in Selma
We service all four Dvele model families: Dvele IQ, Dvele Balance, Dvele Origin, and Dvele Duo. That includes the envelope panels, low-slope membrane roofs, smart-home sensor arrays, and integrated mechanical rough-in on each line. Our parts discipline is straightforward: factory-equivalent for anything that touches the building envelope or smart system, sourced from Dvele’s specified vendors or certified aftermarket equivalents that meet the same performance specs. We stock common Dvele panel joint sealants and membrane patch materials locally so Selma jobs don’t wait on out-of-state freight. We replace rather than patch when panel blisters, joint cracks, or membrane tears exceed six linear feet, or when moisture readings exceed 20% in sheathing. Below that threshold, a proper repair restores the system’s air-tightness without a full panel swap.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in Selma
Selma Dvele service pricing depends on what failed, how far the damage spread, and whether we’re repairing or replacing. Here are the most common line items we quote on Dvele homes in Selma:
| Service | Price Range |
|---|---|
| Dvele Panel Joint Re-Sealing (per 100 linear ft) | $1,200 – $3,200 |
| Dvele-Spec Roof Membrane Patch (up to 100 sq ft) | $800 – $2,200 |
| Smart-Home Sensor Diagnostics & Replacement | $350 – $900 |
| Full Kitchen Remodel | $14,000 – $45,000 |
| Roof Replacement | $8,000 – $20,000 |
What drives the cost on Selma Dvele work is scope of the affected panel area, how much membrane needs replacement, and whether smart-home recalibration is required after the repair. Every free estimate is a written, line-item quote delivered before any work starts, no verbal numbers that grow later. We also provide a written guarantee on every completed project, covering clearly stated terms for 365 days from the completion date, with a free return visit if a repair or installation fails. If you want an exact number for your Dvele home in Selma, call (254) 269-5071 and we’ll schedule the free estimate.
Serving Selma, TX - Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in Selma
We treat panel joint cracks as a movement symptom first and a sealant problem second. In Selma’s expansive clay, some slab heave is normal, so we begin by checking whether the crack is cosmetic movement at the joint or something structural behind it. Then we re-seal with a Dvele-spec joint sealant that stretches without failing and schedule a follow-up inspection to confirm the joint is holding. Call (254) 269-5071 for an exact quote on your panel joints, estimates are free.
Yes. We patch hail damage on Dvele low-slope membranes using Dvele-spec TPO materials and factory-equivalent sealants, and we verify the Dvele IQ moisture sensors are still reading accurately after the repair. The key is keeping moisture out of the panel cavity during the patch, because a false-calibrated sensor is as bad as no sensor at all.
We repair when moisture readings in the sheathing are below 20% and the damaged joint or membrane area is under six linear feet. Above those thresholds, we replace the affected panel section and re-seal the entire joint assembly to Dvele spec. For a Cibolo Creek-area home with storm-driven roof leaks, the earlier you call the less likely you’ll need a full panel replacement. Call (254) 269-5071 and we’ll send a tech to assess it.
We map the existing Dvele IQ sensor routing and mechanical rough-in before any demo work starts, then sequence the new electrical and mechanical work so the smart-home system stays calibrated through the entire build. This is where most contractors without Dvele experience get into trouble: they move a wall and six sensors go dark, then the homeowner is left with a system that no longer reads accurately. We plan it so that doesn’t happen.
Most Dvele envelope repairs in Selma can be scheduled within one to two weeks, depending on parts availability and the scope of the damage. Larger additions or full remodels on Dvele homes take longer because panel fabrication and smart-home integration have to be sequenced correctly. Call (254) 269-5071 for a current lead-time estimate on your specific project, the estimate is free and there’s no obligation.
Service Areas Near Selma
Selma sits at the center of our Northeast San Antonio coverage. We regularly run Dvele jobs in San Antonio, Boerne, Terrell Hills, Cibolo, and Leon Valley. If you’re in one of those areas and own a Dvele home, our service area page covers the specifics for your location.
Book Your Dvele Service in Selma Today
If your Dvele home in Selma needs a roof membrane patch, panel joint re-sealing, smart-home diagnostics, or a full remodel, call (254) 269-5071. You’ll talk to a live person, not a call tree, and we’ll get your free written estimate scheduled. We’re ready to get to work.
Written by Isaac Pruett, Owner at Mason Remodeling Co San Antonio, serving Selma and the surrounding San Antonio metro since our founding in 2004.
