







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with







See the difference
Before
After
Before
After
Before
AfterHow Much Does Metal Roof Installation Cost in San Antonio?
Metal roof installation in San Antonio typically costs between $15,000 and $40,000 for a standard single-family home, with most homeowners paying around $22,000 to $28,000 for standing seam panels on a 1,800 to 2,400 square foot roof. This works out to roughly $8 to $16 per square foot installed, depending on the metal type, panel profile, roof complexity, and whether you’re replacing an existing roof or starting fresh. Compared to asphalt shingles, you’ll pay more upfront, but metal roofs in this climate routinely last 40 to 60 years, which changes the math considerably over time.
We’ll walk through exactly what drives that price range in San Antonio, what different metal types cost, and when spending more actually saves you money. If you want a written, line-item quote for your specific roof, call (254) 269-5071 and we’ll schedule a free on-site estimate.

Metal Roof Installation Cost Breakdown (2026)
Here’s how a typical metal roof installation in San Antonio breaks down by component. These are real market ranges for our area as of 2026, not national averages that ignore local labor rates and material availability.
| Cost Component | Typical Range (San Antonio, 2026) | Notes |
|---|---|---|
| Metal panels (materials only) | $4.50 – $9.00 per sq ft | Steel is cheaper; aluminum and copper run higher. |
| Underlayment & fasteners | $0.75 – $1.50 per sq ft | High-temp underlayment recommended for SA heat. |
| Trim, flashing & ridge caps | $1.50 – $3.00 per sq ft | More roof penetrations = more trim. |
| Labor (tear-off + install) | $2.50 – $5.00 per sq ft | Steep pitches and two-story homes cost more. |
| Old roof removal & disposal | $1,200 – $3,500 total | Depends on layers and landfill fees. |
| Permits & inspections | $300 – $800 total | City of San Antonio building permit required. |
| Total installed cost | $9,000 – $19,000 per 1,500 sq ft | Full range for typical homes: $15k – $40k. |
These numbers assume a roof in reasonable structural condition. If your decking has rot from years of San Antonio humidity and storm cycles, you’ll add $2 to $4 per square foot for plywood or OSB replacement. Homes in older neighborhoods like Monte Vista or Alamo Heights frequently need decking work before new metal can go on, while newer construction in Stone Oak or Cibolo usually doesn’t.
What pushes you toward the high end? Standing seam panels cost more than exposed fastener corrugated. A two-story home in the Dominion with a steep 8/12 pitch runs labor up fast. Copper, which some homeowners in Terrell Hills and Olmos Park choose for its appearance, can push past $30 per square foot installed. What pulls you down? A simple gable roof, a single story, and choosing 26-gauge steel snap-lock panels instead of custom-fabricated standing seam.
Metal Roof Types and What They Cost in San Antonio
The single biggest pricing decision you’ll make is which metal system to install. Here’s what we see in the San Antonio market right now:
- Exposed fastener steel panels (26-29 gauge): $8 – $12 per sq ft installed. The most affordable option. Common on barns, shops, and budget-conscious homes. Screws are visible on the panel face, which means you’ll eventually need to check and possibly replace gaskets every 15 to 20 years.
- Standing seam steel (24-26 gauge): $11 – $16 per sq ft installed. The most popular residential choice in San Antonio. Hidden fasteners, cleaner look, better wind performance. This is what we recommend for most homes in areas like Helotes and Schertz where wind-driven rain is a real concern.
- Aluminum standing seam: $13 – $18 per sq ft installed. Excellent corrosion resistance, which matters within a few miles of the coast, but San Antonio’s inland location means steel performs nearly as well for less money. Still, some homeowners choose it for the softer finish.
- Stone-coated steel (Decra, Gerard): $10 – $15 per sq ft installed. Looks like shingles or tile from a distance, which can help with HOA approval in deed-restricted communities like Alamo Ranch or Fair Oaks Ranch.
- Copper (standing seam or flat-lock): $25 – $40+ per sq ft installed. Rare in San Antonio, but occasionally specified in luxury builds around the Dominion or historic restorations in King William. Beautiful patina over decades, but the upfront cost is significant.
For most San Antonio homeowners, 24-gauge steel standing seam is the sweet spot. It handles our hail season better than exposed fastener panels, and the cost difference over 40 years of ownership is negligible when you factor maintenance and replacement cycles.
What Affects Metal Roof Installation Pricing in San Antonio
San Antonio has specific pricing dynamics that differ from Dallas, Houston, or Austin. Here’s what actually moves your number:
- Hail and wind exposure requirements: San Antonio sits in a high-wind zone per the International Building Code. In neighborhoods north of Loop 1604, wind uplift ratings matter, which can push you toward a thicker gauge and pricier fastener systems. Homes in the Hill Country corridor around Boerne and Fair Oaks Ranch often require enhanced wind ratings that add $1 to $2 per square foot.
- Roof pitch and height: Single-story, low-pitch roofs (3/12 to 6/12) are fastest and cheapest to metal. Steep roofs (8/12 and above) common in King William and Monte Vista historic districts require safety harnesses, staging, and more labor hours. Figuring a $2 to $4 per square foot premium for steep or complex roofs is reasonable.
- Number of roof penetrations: Every vent pipe, chimney, skylight, and exhaust fan flashing adds trim work and labor. A simple roof with six penetrations might cost $400 less in labor than a complicated one with fourteen.
- Decking condition: San Antonio’s heat and humidity take a toll on plywood and OSB. If your decking is soft, water-stained, or delaminating (common in homes built before 1990), you’ll pay $2 to $4 per square foot to replace it before metal goes down.
- Permit requirements: The City of San Antonio requires a building permit for roof replacement, including metal installation. Permits and inspections typically run $300 to $800 depending on the project scope. Unincorporated parts of Bexar County may have different fee schedules.
- Seasonal demand: Roof work in San Antonio books up fast from March through October. If you can schedule for November through February, some crews offer slightly better labor rates, though the difference is modest (5 to 10 percent at most).
At Mason Remodeling Co San Antonio, we put every one of these factors in writing before any work starts. You’ll get a line-item breakdown showing exactly where your money goes on price per square foot, labor, permit fees, and material selections.

How to Save on Metal Roof Installation Without Sacrificing Quality
Metal is an investment, but there are legitimate ways to control the number without cutting corners that’ll come back to bite you. These are strategies we use with our own clients in San Antonio:
- Choose 26-gauge steel instead of 24-gauge when the budget is tight. For homes in central San Antonio with moderate wind exposure, 26-gauge standing seam performs well and saves $1 to $2 per square foot.
- Keep your roof geometry simple if you’re already planning an addition or remodel. Fewer valleys, dormers, and transitions means less trim fabrication and less labor. This is a design conversation worth having before plans get finalized.
- Schedule during the slower season. Roofing crews in San Antonio are most available from November through February. You won’t see dramatic discounts, but you’ll get faster scheduling and more attention to detail.
- Ask about overlaying instead of tearing off. In some cases, metal can be installed over a single layer of shingles using battens, which eliminates tear-off and disposal costs ($1,200 to $3,500). This isn’t appropriate for every roof, and the City of San Antonio has specific code requirements, but it’s worth discussing.
- Get a written, itemized quote before you sign anything. San Antonio has plenty of roofing companies, and pricing varies more than you’d expect. A written quote with line items lets you compare apples to apples. We deliver a written price on every project, before any work begins, as standard practice. Call (254) 269-5071 for a free estimate.
Is Metal Roofing Worth the Cost in San Antonio?
Yes, for most homeowners planning to stay in their home for 10 or more years. Here’s the math in plain terms.
An asphalt shingle roof in San Antonio costs $8,000 to $20,000 and lasts 15 to 20 years before our sun and hail beat it up. You’ll likely replace it twice over a 40-year period, spending $16,000 to $40,000 in total. A metal roof at $15,000 to $40,000 goes on once and generally outlasts the homeowner. When you add the insurance premium discounts many San Antonio carriers offer for impact-resistant roofing (some policies reduce rates 10 to 25 percent for Class 4 rated metal), the long-term numbers favor metal.
Metal also reflects heat rather than absorbing it. Homes with lighter-colored metal roofs in San Antonio routinely see attic temperatures 20 to 30 degrees cooler in August than homes with dark asphalt shingles. That translates to lower cooling bills during months when CPS Energy rates climb.
For information on our full Metal Roof Installation in San Antonio services, including product options from GAF, CertainTeed, and Owens Corning, we’ve put together a detailed guide. If you’re comparing metal to a full roof replacement, our pricing page covers both options side by side.
FAQs – Metal Roof Installation Cost
How much does a metal roof cost for a 2,000 square foot home in San Antonio?
For a 2,000 square foot single-story home, expect to pay $16,000 to $32,000 for a standing seam steel roof installed, including tear-off, underlayment, trim, and labor. A simple gable roof with few penetrations sits at the lower end, while a steep or complex roof in areas like Hollywood Park or Castle Hills runs higher. Call (254) 269-5071 for an exact quote – estimates are free.
Is a metal roof more expensive than shingles in San Antonio?
Upfront, yes. Metal roof installation in San Antonio costs $15,000 to $40,000 compared to $8,000 to $20,000 for architectural asphalt shingles. However, metal lasts 40 to 60 years in our climate versus 15 to 20 for shingles, which means most homeowners break even or come out ahead within two decades when you factor in one avoided shingle replacement.
How long does metal roof installation take in San Antonio?
Most residential metal roof installations in San Antonio take 2 to 5 working days for tear-off and installation. Custom standing seam with complex flashing or steep pitches can extend to a week. Weather permitting, we schedule crews to minimize the time your roof is exposed, and we’re available to answer questions at every step – call (254) 269-5071 to talk through your timeline.
Does a metal roof increase home value in San Antonio?
Yes. A metal roof typically returns 50 to 70 percent of its installed cost at resale in the San Antonio market, according to residential appraisal data, and homes with metal roofs in neighborhoods like Stone Oak and The Dominion often sell faster because buyers recognize the reduced maintenance burden. Some insurance carriers in Bexar County also offer premium discounts for impact-rated metal roofing.
Can metal roofing be installed over existing shingles in San Antonio?
Yes, in many cases metal panels can be installed over a single layer of asphalt shingles using a batten system, which saves $1,200 to $3,500 in tear-off and disposal costs. The City of San Antonio building code permits this under specific conditions, including decking that’s in sound condition. During our free estimate, we’ll inspect your roof and tell you in writing whether overlay is an option for your home or whether a full tear-off is required.
What is the cheapest type of metal roof for a San Antonio home?
Exposed fastener steel panels, typically 29-gauge, are the most affordable metal roofing option in San Antonio at $8 to $12 per square foot installed. For a 1,500 square foot roof, that’s $12,000 to $18,000. Keep in mind these panels require fastener inspections and gasket replacement every 15 to 20 years due to thermal expansion in our climate, while standing seam systems are largely maintenance-free.
Get a Written Metal Roof Installation Estimate in San Antonio
Isaac Pruett, who leads Mason Remodeling Co San Antonio, has been part of the Threshold Group family of home-service companies since 2004, and he’s overseen metal roofing projects across Bexar County from Helotes to Schertz and everywhere in between. Every project comes with a written price before any work begins, a written guarantee with clearly stated terms, and the 365-Day Done Right Promise: if the work isn’t right within a year of completion, we make it right at no cost to you.
When our crew arrives, you’ll already know who’s coming – every technician is background-checked, identity-verified through the Threshold Standard, and you’ll receive their name and photo before the visit. They’ll show up in a clean uniform with a photo ID badge at the door.
Call (254) 269-5071 for a free estimate on metal roof installation in San Antonio. A person answers the phone, day or night, and you’ll get a written price before any tools hit your property. Or start with our home page to explore the full range of exterior and interior projects we handle.
Pricing reflects the San Antonio market as of 2026. Mason Remodeling Co San Antonio offers free estimates – call (254) 269-5071.
What Our Customers Say
"Bathroom gut job. Replaced the old tub with a walk-in shower and added a niche. Waterproofing was done properly with a flood test before tile."
- Greg L."Great quality tile work. The countertop template slipped by a week, but the project lead explained and kept us updated."
- Susan Y."Kitchen remodel with new cabinets, quartz counters, and a tile backsplash. Crew had ID and were background checked. Kept the work area clean and sealed off dust from the rest of the house."
- Janice D.











