Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gutter Installation Cost in San Antonio?
Gutter installation in San Antonio typically costs between $1,800 and $5,500 for a standard single-family home, with most homeowners paying around $3,200 for approximately 150 to 200 linear feet of seamless aluminum gutters. The biggest variables are the gutter material, total linear footage, and whether you’re replacing existing gutters or starting fresh. For a precise number on your home, call Mason Remodeling Co San Antonio at (254) 269-5071 and we’ll give you a written price before any work begins.
San Antonio’s combination of intense spring downpours, long dry stretches, and clay-heavy soil means gutters aren’t optional here. They’re the difference between a dry foundation and the kind of soil shifting that cracks slabs and pulls apart exterior brick. If you’re weighing the cost, think of it as protecting a footing that sits on some of the most expansive clay in Texas.
Gutter Installation Cost Breakdown (2026)
Here’s what you can expect to pay in the San Antonio market right now, broken down by material and project type. These ranges reflect pricing we see across Alamo Heights, Stone Oak, Helotes, Converse, and the older neighborhoods inside Loop 410.
| Gutter Type / Project | Typical Cost Range (San Antonio, 2026) |
|---|---|
| Vinyl gutters (basic, sectional) | $1,200 – $2,800 |
| Aluminum seamless gutters (most common) | $1,800 – $4,200 |
| Steel gutters | $2,500 – $5,500 |
| Copper gutters | $6,000 – $14,000+ |
| Gutter replacement (removal + new install) | $2,200 – $5,500 |
| Downspout installation (per downspout) | $150 – $400 each |
| Gutter guards (add-on, per linear foot) | $8 – $25 per linear foot |
| Full gutter system for 2-story home | $3,500 – $7,500 |
The gap between the low and high end comes down to three things: the material you choose, how many corners and downspouts your roofline requires, and whether the crew can reach everything from a ladder or needs scaffolding and lift equipment. Two-story homes in the Dominion or parts of Terrell Hills almost always land on the higher end because of access and fall-protection requirements.
Aluminum seamless gutters remain the sweet spot for San Antonio homes. They’re extruded on-site to match your exact roofline, which eliminates the leak-prone seams that sectional vinyl gutters develop within a few seasons of Texas sun. At $6 to $12 per linear foot installed, they cost more than vinyl but last 20-plus years with minimal upkeep, where vinyl often needs full replacement inside a decade.
What Affects Gutter Installation Pricing in San Antonio
Every house is different, and the price of gutters follows the geometry of your specific roofline, not a national average. Here’s what moves the number.
- Linear footage and roofline complexity. A simple ranch in Castle Hills may need 120 linear feet. A two-story with multiple gables in Elm Creek could run 300-plus. More corners means more seams, more brackets, and more downspouts, and labor is priced by the hour.
- Material choice. Vinyl is cheapest but warps in San Antonio’s triple-digit summers. Aluminum is the value pick. Galvanized steel suits homes near Loop 1604 where hail is common, but it’s heavier and costs more. Copper is a statement that starts at $25 per linear foot, and it ages to that green patina over a decade or two in our humidity.
- Story height and access. First-story gutters on a flat lot in Harlandale are a straightforward ladder job. Second-story work in any neighborhood with steep driveways or dense landscaping requires scaffolding, lift rentals, or additional crew, and that adds $500 to $1,500 fast.
- Existing gutter removal. If old gutters are nailed through the fascia and painted over, demo is slower, and the fascia board underneath may need patch work or replacement. Budget $200 to $600 extra for full removal and disposal.
- Downspout count and drainage routing. San Antonio’s clay soil doesn’t absorb water quickly, so downspouts need to route at least 5 to 6 feet from the foundation. More downspouts, splash blocks, or buried drain lines add $150 to $400 per location.
- Time of year. Spring is gutter season in Bexar County. Prices don’t necessarily rise, but scheduling gets tighter. If you can book in late fall after leaf drop or early winter, crews are faster and you’ll get more scheduling flexibility.
How to Save on Gutter Installation
Saving money on gutters isn’t about finding the cheapest bid. It’s about avoiding a do-over, because the cost of a failed gutter system in San Antonio goes beyond the gutters themselves. Water pooling at the slab edge is how you get foundation repairs that run five times the gutter price. Here’s what actually saves you money.
- Replace before it fails, not after. If your gutters are pulling away from the fascia, rusting at the seams, or the downspouts dump water against the house, replacing them now is always cheaper than repairing the damage they’re causing. The math is simple: a $3,200 gutter system versus a $12,000 foundation pier job.
- Do the whole house at once. Partial gutter replacement costs more per foot because the crew still has to mobilize, set up, and work around existing sections. If one side is failing, the others aren’t far behind.
- Ask about off-season scheduling. Late November through January is the slowest stretch for gutter crews in San Antonio. You won’t get a discount, but you’ll get faster scheduling and more time with the installer to eyeball every seam before they leave.
- Get a written price before you commit. A verbal estimate that “should be around $2,800” can become $4,100 on the final invoice. At Mason Remodeling, we put the number in writing before any work starts. No surprises, no caveats, no change-order games. Call (254) 269-5071 and we’ll measure your roofline and hand you a real number.
- Consider gutter guards, but not blindly. In neighborhoods with mature live oaks and pecan trees, like Olmos Park or Monte Vista, guards pay for themselves by keeping pine needles and leaf litter out of the channels. But not every guard works for every tree type. We’ll tell you honestly whether your trees justify them.
Aluminum vs. Vinyl vs. Steel vs. Copper: What You Actually Get for the Money
Most price guides list materials without saying what actually goes wrong with each one in San Antonio. Here’s the honest breakdown we give homeowners during an estimate.
Vinyl: $4 to $9 per linear foot. It’s cheap and easy to cut. It’s also the worst match for our climate. San Antonio summers push attic and roofline temperatures well past what vinyl is rated for, and we regularly see vinyl gutters sagging between brackets within five years. UV exposure makes them brittle, and once a section cracks, you’re replacing entire runs because vinyl doesn’t patch cleanly. If budget is the only deciding factor and you plan to sell within a few years, it’s viable. Otherwise, skip it.
Aluminum: $6 to $12 per linear foot. Seamless aluminum is the workhorse. It handles heat, it’s light enough for most fascia boards, and it resists corrosion in San Antonio’s occasional Gulf humidity. The K-style profile we install most often carries water efficiently during the intense downpours that hit the Hill Country in April and May. Aluminum can dent in big hail, but a 0.032-gauge panel is tough enough for most storms we get inside the city proper.
Steel: $8 to $16 per linear foot. Steel is for hail country. If you’re in far north Bexar County where storms roll off the escarpment with real force, steel gutters absorb impacts that would crumple aluminum. The tradeoff is weight and rust risk. Steel gutters need proper painting and periodic touch-ups, and they’re harder to work with, so installation labor runs higher.
Copper: $25 to $45 per linear foot. Copper is a different product entirely. It’s a 75-year material that never needs paint and eventually turns the dark bronze and green that you see on older homes in King William and Monte Vista. The price is real, but so is the look. If you own a historic home or you’re tired of replacing gutters, copper is the last gutter system you’ll ever buy.
What’s Included in a Gutter Installation Quote?
Not all quotes cover the same scope, and this is where homeowners in San Antonio lose money without knowing it. Here’s what a complete gutter installation should include, and what we write into every proposal from Mason Remodeling.
- Removal and disposal of existing gutters. If the quote doesn’t mention demo, ask. Some contractors leave the old gutters at the curb or expect you to handle disposal.
- Fascia inspection and repair. Gutter crews touch the fascia board constantly, and we find rotten fascia on nearly half the homes we work on inside Loop 410, where soffits and fascia boards have baked in 50-plus Texas summers. Repairing the fascia before hanging new gutters is critical, and it should be in the written price, not a surprise add-on.
- Downspouts and outlets. A proper quote itemizes exactly how many downspouts are included and where they’ll terminate. Splash blocks, extensions, or buried drains should be listed separately.
- Fastener type. Hidden hangers with screws outperform the old spike-and-ferrule method that pops out of the fascia within a few years of expansion and contraction. Ask what fasteners are included.
- Slope and pitch correction. Gutters need a consistent downward slope toward each downspout, usually about a quarter inch per 10 feet. An installer who doesn’t measure and set pitch on every run is guessing.
- Sealant at every seam and end cap. Even seamless gutters have corners and end caps that need sealing. What sealant is used matters. We use a commercial-grade polyurethane sealant rated for Texas temperature swings.
Here’s the short version: if the quote doesn’t spell out demotion, disposal, fascia work, downspout count, and fastener type, you’re not comparing equal quotes. That $2,200 bid you got from someone else might become $3,600 once the missing items hit the invoice.
Gutter Installation vs. Gutter Repair: When to Replace in San Antonio
Most gutters in San Antonio fail in predictable ways, and knowing the difference between repairable and terminal saves you money. Here’s what we tell homeowners who call asking if we can fix what they have.
Repairable: a single loose bracket, a separated corner seam, a downspout that’s popped out of its outlet, or a section that’s pulled away from the fascia but is still intact. These are $150 to $400 repairs, and a competent gutter crew handles them in under two hours.
Replaceable: rust through the bottom of the channel, multiple separated seams that leak in the same run, sagging between every bracket (a sign the material has lost its rigidity), or any gutter system older than 20 years in our climate. The math on 20-year-old gutters is simple: the fasteners are tired, the sealant is shot, and the material is fatigued from two decades of thermal cycling. You can chase repairs forever, or replace it once and be done.
If water is overflowing at the corners during heavy rain, your gutters aren’t undersized: they’re clogged or pitched wrong. If water is dripping from the bottom of the channel, you have a leak, not a capacity problem. These are distinct issues with different fixes, and an honest contractor diagnoses them differently.
For homes being prepped for sale, new gutters are one of the highest-return exterior upgrades in the San Antonio market. Buyers here know what foundation trouble looks like, and visible gutter decay shows up on inspection reports. A $3,000 gutter replacement reads as “maintained home” to a buyer who has already walked two other houses with leaning fences and cracked driveways.
How Mason Remodeling Approaches Gutter Installation
Gutter installation sits inside Mason Remodeling’s general contracting work, and we treat it with the same process we apply to a kitchen or a bathroom: a written price before anything starts, a named crew you can screen before they arrive, and a guarantee that covers the work in writing for 365 days from the completion date. The 365-Day Done Right Promise is simple. If the work isn’t right within a year, we make it right at no cost to you.
We built this standard in 2004 as part of the Threshold Group family of home-service companies, and it hasn’t changed. Every technician who walks your property is background-checked and identity-verified under The Threshold Standard. That means you get the name and photo of the technician before the visit, and they arrive in a marked uniform, show a photo ID badge at the door, and introduce themselves by name. For homeowners who are alone during the day, have young children, or simply don’t open the door to strangers, that’s not a nice-to-have. It’s the whole point.
Our material partnerships include specification-grade products across the trades, and for gutter work, that means commercial-grade aluminum coil, hidden hangers, and polyurethane sealants, not whatever the supply house had on sale that week. We also offer Copper and steel options for homeowners who want a specific performance profile or a specific look.
If you’re comparing quotes, compare what’s actually inside them. Here’s what our gutter estimates always include: full removal and disposal of old gutters, fascia inspection and repair pricing as a separate line item, exact downspout count and placement, slope correction on every run, and a written guarantee with terms stated plainly. Nothing verbal. Nothing “we’ll see when we get up there.”
And if a repair or installation fails, you get a free second visit. No charge, no dispute process, no conditions. That’s part of the guarantee, and we put it in writing.
FAQs – Gutter Installation Cost in San Antonio
What is the average cost of gutter installation in San Antonio, TX?
The average gutter installation in San Antonio costs about $3,200 for a single-story home with 150 to 200 linear feet of seamless aluminum gutters. Smaller homes start around $1,800, while larger two-story homes with complex rooflines range from $4,500 to $7,500. Call (254) 269-5071 for an exact written quote, no obligation.
How much do seamless aluminum gutters cost per foot in San Antonio?
Seamless aluminum gutters in San Antonio cost $6 to $12 per linear foot installed, including hangers, end caps, and sealant. The price per foot drops as total footage rises, so a 200-foot job lands on the lower end of that range, while a small 80-foot project runs higher per foot. Downspouts are priced separately at $150 to $400 each.
Is it cheaper to repair or replace gutters in San Antonio?
A single gutter repair typically costs $150 to $400 in San Antonio, while full replacement runs $1,800 to $5,500. Repairs make sense when the gutters are under 10 years old and the damage is isolated. If the system is over 15 years old or leaks in multiple places, replacement is usually the better long-term value, since repair costs on aging gutters stack toward replacement price within a few years of patching.
How much do gutter guards cost in San Antonio?
Gutter guards in San Antonio cost $8 to $25 per linear foot installed, or roughly $1,200 to $4,000 for a typical home. The range depends on the guard type: foam inserts and brush guards are cheapest but clog quickly here, micro-mesh guards run $12 to $20 per foot, and surface-tension guards are the most expensive but work best in heavy rain. Homes under mature oak canopies in areas like Alamo Heights benefit most from guards. Call (254) 269-5071 and we’ll tell you whether your trees warrant them.
How long does gutter installation take in San Antonio?
Most gutter installations in San Antonio are completed in one day, typically 4 to 8 hours for a single-story home. Two-story homes or projects requiring fascia board repair may take 2 full days. Once we measure your roofline and give you a written price, we’ll also give you a firm installation date, not a window. A live person answers the phone 24/7 at (254) 269-5071 to schedule your free estimate.
Do gutters really matter in San Antonio if it doesn’t rain that much?
Yes. San Antonio gets roughly 32 inches of rain a year, but it arrives in concentrated storms, especially in spring and early fall. More importantly, the clay-heavy soil under most San Antonio homes expands and contracts dramatically with moisture, which is exactly what cracks slabs and shifts foundations. Gutters channel that storm water away from the footing, and in neighborhoods with expansive clay, they’re the cheapest foundation protection you can buy.
San Antonio Gutter Installation Costs by Neighborhood
Pricing varies slightly across the metro depending on home age, roofline styles, and access conditions. Here’s what we see in the field:
- Alamo Heights & Terrell Hills: Older homes with mature trees, steep rooflines, and sometimes second-story runs. Expect $2,500 to $5,500 for full replacement, with the higher end driven by access and fascia repair on 1950s and 1960s construction.
- Stone Oak & the far north side: Newer construction, mostly two-story, with long straight runs. Typical jobs land at $3,000 to $5,000, with hail-resistant steel sometimes preferred near the escarpment.
- Inside Loop 410 (Monte Vista, King William, Beacon Hill): Historic homes need careful fascia preservation and often custom downspout routing. $2,800 to $6,000, and copper is a common request for restoration projects.
- Westover Hills & SeaWorld area: Mid-century ranches with simple rooflines, typically $1,800 to $3,500 for full seamless aluminum.
- Schertz, Cibolo, Converse, and the I-35 corridor: Fast-growing subdivisions with manageable single-story homes, most jobs fall at $2,000 to $4,000.
Wherever you are in Bexar County, we’ll come out, measure the actual roofline, and give you a written price. No ballpark, no “probably around,” no surprises. If you’ve been putting off gutters because you don’t want another contractor who shows up late and won’t put anything in writing, call (254) 269-5071 and we’ll show you how this is supposed to work.
Pricing reflects the San Antonio market as of 2026. Mason Remodeling Co San Antonio offers free estimates – call (254) 269-5071.
Written by Isaac Pruett, Owner at Mason Remodeling Co San Antonio, serving San Antonio since 2004.
What Our Customers Say
"Written scope, fixed price, and weekly updates. No change orders we hadn't agreed to."
- Carlos H."Bathroom gut job. Replaced the old tub with a walk-in shower and added a niche. Waterproofing was done properly with a flood test before tile."
- Greg L."Great quality tile work. The countertop template slipped by a week, but the project lead explained and kept us updated."
- Susan Y.
