Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Roofing: The San Antonio Owner’s Guide
We stock and install Wellborn-compatible roofing components throughout San Antonio, with most replacement jobs running $400 – $1,800 for repairs and $8,000 – $20,000 for full roof replacement, depending on what’s actually failed. Most San Antonio homeowners discover a Wellborn roofing problem the same way: a water stain on the ceiling after a heavy Hill Country thunderstorm, or granules collecting in the gutters after a windy stretch. Parts fail in patterns, and we’ve seen enough of these roofs across neighborhoods like Alamo Heights, Stone Oak, and King William to know exactly what goes bad first.
Which Wellborn Models This Applies To
Wellborn’s roofing line covers a few distinct series, and the failure point is almost always tied to how the roof was originally installed rather than the Wellborn material itself failing. The most common Wellborn roofing systems we service in San Antonio are their architectural shingle lines, standing seam metal profiles, and the underlayment assemblies that go beneath both. Here’s the compatibility gotcha most homeowners don’t know: Wellborn’s metal roofing profiles use a 1-3/4″ seam height on their standing seam panels, which is slightly taller than the more common 1-1/2″ profile used by other manufacturers. That means off-the-shelf trim, ridge caps, and flashing from a big-box store won’t seat correctly. We match parts by panel width, seam height, and the gauge stamped on the underside of an exposed panel edge.
On the shingle side, Wellborn uses standard asphalt architectural shingles that are cross-compatible with quality equivalents from GAF, CertainTeed, and Owens Corning. The catch is color matching: a 10-year-old Wellborn shingle has faded in the Texas sun, and even the same SKU looks different fresh out of the package. We handle this by pulling a sample from your roof and matching against a physical color board, not a phone photo. We’re an independent service provider, not affiliated with Wellborn, which means we’re free to tell you when an aftermarket part does the job just as well for less money, and when it doesn’t.
If you’re unsure which Wellborn series you have, check the attic for a label on the inside of the decking, or look for a stamp on any accessible metal edge. If there’s nothing visible, take measurements and call us. We’ll walk you through what to look for before we ever schedule a visit.
Styles & brands we work with
Signs Your Wellborn Roofing Is Failing
- Granules in the gutters or at downspout elbows. Asphalt shingles shed granules as they age, but a heavy accumulation after one season means the protective layer is degrading faster than it should. In San Antonio’s UV intensity, we see this accelerated on south- and west-facing slopes.
- Ceiling stains that appear days after a storm. A slow underlayment leak often doesn’t show up immediately. Water saturates the decking, pools, and then bleeds through at a seam or fastener. By the time you see the stain, the underlayment has already failed.
- Lifted or curling shingle edges at roof transitions. The San Antonio temperature swing between August heat and the occasional February freeze causes the adhesive strip on shingles to lose grip over time. Curled edges are the first visible sign that wind-driven rain can get underneath.
- Rust staining on standing seam panels or exposed fasteners. Wellborn’s metal profiles hold up well, but the fasteners can fail before the panels do. When you see rust trails running from a screw head, the neoprene washer has dried out and the seal is gone.
- Daylight visible through the attic decking. If you can see pinpoints of light through the roof boards from inside the attic, water can find the same path. This is worth checking after any hail event, which San Antonio gets routinely each spring.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a Wellborn roofing repair in San Antonio, you’re looking at $400 – $1,800 for most isolated failures: a section of damaged shingles, a failed valley, a handful of compromised fasteners on a metal roof, or a piece of flashing that pulled loose. A full Wellborn-compatible roof replacement runs $8,000 – $20,000 depending on square footage, pitch, tear-off requirements, and whether we’re matching shingles or rebuilding a metal system. The range is wide because a single-story ranch in Windcrest and a two-story tile-topped home in Terrell Hills are very different jobs.
Every quote we write includes the parts, the labor, the disposal, and the underlayment in one line-item price before any work starts. You get the written price before a single tool comes off the truck, and the work is covered by a written guarantee for 365 days from the completion date. If something’s not right in that window, we come back and fix it at no charge. No dispute process, no fine print.
DIY or Call Us?
Here’s where we’re honest: you can safely check a few things yourself. Clear debris from valleys and gutters. Look for lifted shingle edges from the ground with binoculars. Check the attic for daylight or water staining after a storm. Those inspections don’t require a ladder or a harness.
What we don’t recommend is getting on a San Antonio roof in July to swap shingles yourself. Steep pitches, high heat, and unexpected soft decking turn a $600 repair into a hospital visit faster than most people expect. Metal roofing is worse: Wellborn’s standing seam profiles require specialized seam tools and precise fastener torque to maintain the profile. If you’re unsure whether your problem is minor or structural, call (254) 269-5071. Isaac Pruett will walk you through what you’re seeing and tell you straight if it needs a crew or just a patch.
FAQs
Wellborn architectural shingles typically last 15 – 20 years in San Antonio’s climate, while their standing seam metal systems can go 30 – 40 years when properly installed. The Texas heat and UV intensity shorten shingle life compared to cooler markets, and we factor that into every recommendation.
Isolated damage like a few lifted shingles, a failed valley, or compromised fasteners can usually be repaired for well under $1,800, as long as the underlayment beneath is still sound. Full replacement only makes sense when the underlayment has failed or the shingles are past their useful life across multiple slopes. Call (254) 269-5071 for an honest assessment and a free estimate.
Most isolated repairs are completed in a single visit, typically 2 – 4 hours on site. Full roof replacements take 1 – 3 days depending on square footage and whether we’re tearing off existing materials. We’ll give you the timeline in writing before work starts.
We keep the most common Wellborn-compatible parts on our trucks: shingle bundles across the standard color range, underlayment, flashing, and metal roofing fasteners with the correct washers for San Antonio’s climate. If we don’t have it on hand, we’ll source it and have everything staged before the job starts. We also stock parts for KraftMaid, Cambria, and Silestone when roofing work uncovers related exterior or interior issues.
Written by Isaac Pruett, Owner, Mason Remodeling Co San Antonio at Mason Remodeling Co San Antonio, serving San Antonio and nearby areas.
