Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Kitchen Remodeling: The San Antonio Owner’s Guide
Tamko kitchen remodeling in San Antonio typically runs $14,000 to $45,000 installed, depending on cabinet layout, countertop material, and whether we’re moving plumbing or electrical. We stock Tamko-compatible cabinet hardware, trim, and replacement components on our trucks, and we can match most Tamko cabinet lines same-week. Most San Antonio homeowners call us after they notice a cabinet door that won’t close square, delaminating edge banding, or drawer slides that bind no matter how many times they’re adjusted.
We’re an independent contractor in San Antonio, not affiliated with Tamko, but we’ve worked on enough Tamko cabinet systems across Bexar County to know exactly what fails first and what’s worth fixing versus replacing. Isaac Pruett and our crew have rebuilt kitchens from Castle Hills to Stone Oak, and the Tamko cabinets we see share a common story: the boxes hold up fine, but the hardware and moving parts give out long before the structure does.
Which Tamko Models This Applies To
Tamko makes several cabinet lines, and the compatibility gotcha is this: hinge and slide specifications changed between Tamko’s older builder-grade series and their current mid-range lines. If you have a cabinet label inside the door or drawer box, look for the series code stamped on it. If the label is gone, measure the hinge cup diameter. Older Tamko builder cabinets used a 32mm cup hinge; newer lines use a 35mm cup. That 3mm difference means a replacement hinge from the wrong series won’t seat properly, and the door will never hang right.
For drawer slides, Tamko’s side-mount slides come in 1/2-inch and 3/4-inch thickness profiles. If you order a replacement without checking, you’ll end up with a slide that either binds against the drawer box or leaves too much play. We keep both profiles on the truck. For homeowners deciding between OEM Tamko parts and quality aftermarket equivalents, our honest guidance: OEM hinges and slides are worth the slight premium because the mounting hole patterns match exactly. Aftermarket soft-close slides are fine when we’re also replacing the mounting brackets. Aftermarket edge banding is almost always fine, and it’s what we stock.
Styles & brands we work with
Signs Your Tamko Kitchen Remodeling Is Failing
- Cabinet doors sag or won’t close square. This usually means the hinge screws have stripped out of the particleboard stile, or the hinge itself has worn at the pivot. A door that needs a shim to look right is a door that’s been fighting its hinge for months.
- Drawers bind mid-travel or stick at the back. Slides lose their ball bearings over time, especially in San Antonio’s dry heat where lubricant breaks down faster. Once you feel a catch mid-pull, the slide is done.
- Edge banding peels away from door and drawer faces. This is the most common Tamko failure we see in San Antonio. The adhesive dries out in our climate, and once moisture gets behind the banding, the particleboard core starts to swell. A 2-inch peel today is a split panel in six months.
- Soft-close dampers stop working. The little gas cylinder inside the hinge wears out. The door still closes, but it slams instead of easing shut. This is a cheap fix if you get it early; ignored, a slamming door finishes off the hinge faster.
- Cabinet boxes pull away from the wall. If you see a gap between the back of the cabinet and the wall, the mounting screws have loosened or the anchors are failing. This can cascade into countertop cracks and misaligned door gaps across the whole run.
Replacement Cost & What’s Included
A full Tamko kitchen remodel in San Antonio runs $14,000 to $45,000. The range is driven by three things: cabinet count and layout complexity, countertop material, and whether plumbing or electrical has to move. A straightforward 10×12 kitchen with stock Tamko cabinets, laminate counters, and no layout changes lands near the bottom. A 15×20 kitchen with a new island, stone counters, and a plumbing relocation lands near the top.
Every quote from Mason Remodeling Co San Antonio is a written price before any work starts. That price includes parts, labor, haul-away of the old cabinets, and disposal fees. No verbal estimates that grow on the final bill. The work is covered by our 365-Day Done Right Promise: if anything is not right within a year of completion, we make it right at no cost to you. Our crew members are background-checked, identity-verified, and you’ll get a name and photo before anyone walks through your door.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself: look for the cabinet label inside the door or drawer box, measure the hinge cup diameter, and note whether your drawer slides are side-mount or bottom-mount. That information saves us a trip and gets you a more accurate estimate on the phone.
What we don’t recommend is replacing cabinet boxes, moving plumbing, or reworking countertop support yourself. A wall cabinet that pulls loose while you’re removing it is an injury waiting to happen, and countertop seams done wrong in San Antonio’s heat will separate within a year. We’ve been called in after more than a few DIY attempts that doubled the repair cost. Call (254) 269-5071 and we’ll talk through what you’re seeing before you pick up a screwdriver.
FAQs
In San Antonio’s climate, Tamko cabinet boxes typically last 15 to 20 years, but hinges, slides, and edge banding often need attention around year 8 to 10. Our dry heat dries out adhesives and lubricants faster than in humid climates, which is why we see more edge banding failures here than anywhere else we work. If your cabinets are nearing 15 years old and the doors and drawers are showing signs, replacing the hardware now buys you another decade before a full remodel. Call (254) 269-5071 for an exact assessment, estimates are free.
Yes, in most cases the boxes are structurally sound and the problem is hardware or banding, which we can replace. If the particleboard stiles or rails are swollen or split, though, replacing the cabinet face or the full cabinet is the honest fix. We’ll tell you which one applies to your kitchen before you spend a dollar. Call (254) 269-5071 and describe what you’re seeing, we’ll give you a straight answer.
Most Tamko kitchen remodels in San Antonio take 3 to 6 weeks from demo to final walkthrough, depending on whether plumbing or electrical moves and what countertop material you choose. A hardware-only replacement on a typical 10×12 kitchen takes 1 to 2 days. You’ll get a written schedule with your written price, so you know what to expect before we start.
Yes, we keep Tamko-compatible hinges in both 32mm and 35mm cup sizes, 1/2-inch and 3/4-inch side-mount drawer slides, edge banding, and damper kits on our trucks at all times. We also stock compatible hardware for KraftMaid, Cambria, and Silestone for the mixed-brand kitchens we often see in San Antonio homes. If we don’t have your exact part on the truck, we can usually source it same-week.
Call Mason Remodeling Co San Antonio for a Free Estimate
You don’t have to guess whether the hinge cup is 32mm or 35mm, or whether the slide profile is 1/2-inch or 3/4-inch. Call (254) 269-5071 and we’ll ask the right questions, tell you what we’d look for, and give you a written price before any work begins. Know who’s coming, know what it costs, know it’s covered, that’s the whole job before the job starts.
Written by Isaac Pruett, Owner, Mason Remodeling Co San Antonio at Mason Remodeling Co San Antonio, serving San Antonio and nearby areas.
