Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Kitchen Remodeling: The San Antonio Owner’s Guide
PGT kitchen remodeling in San Antonio typically runs $14,000 to $45,000 for a full kitchen rebuild, with smaller scoped projects like cabinet replacement or countertop work falling in the $2,000 to $13,000 range. We install PGT-compatible kitchen components alongside KraftMaid, Cambria, and Silestone material partnerships, and we carry the common replacement parts on our trucks so most component failures don’t stall your project. The way San Antonio homeowners usually discover a PGT kitchen component has failed is subtle at first: a cabinet door that no longer sits flush, a countertop seam that’s started to separate near the sink, or a soft-close hinge that’s gone loud.
You’re here because something in your PGT kitchen has stopped working the way it should, and you want it matched, priced, and handled without three weeks of phone tag. That’s the page you’re on.
Key Takeaways
- Full PGT kitchen remodel in San Antonio: $14,000 – $45,000 installed.
- Component-level replacement (hinges, slides, drawer boxes, panels) typically lands well under $1,000 and can often be handled same-visit.
- Mason Remodeling Co San Antonio is an independent service provider – we are not affiliated with PGT, but we install and service their product lines daily.
- We show you the written price before any work starts – every time, no exceptions. Call (254) 269-5071.
Which PGT Models This Applies To
PGT doesn’t make one kitchen line; they make several, and parts are not interchangeable across all of them. The compatibility gotcha we see most often in San Antonio homes is homeowners ordering a hinge or slide assembly based on the cabinet door size alone, without checking the series stamp on the original hardware. A 21-inch door from the PGT Essentials line may take a different mounting plate than a 21-inch door from the PGT Premier series – same face dimension, different bore pattern behind it.
Here’s how we identify the right part. Look for a small white or silver label on the interior wall of the cabinet box, usually on the hinge-side stile or the top rail. It will show a series name and a production date code like “PGT-ESS-0421.” If the label is gone, we measure the bore pattern center-to-center (typically 35mm for European-style hinges PGT uses on most lines) and match the slide length to the drawer box depth. For countertop components, we need the edge profile and thickness: PGT standardizes on 3cm quartz in most of their Texas-installed kitchens, but some older San Antonio builds from the mid-2010s used 2cm with a laminated edge, and you can’t swap a 3cm bracket against a 2cm overhang without re-engineering the support.
OEM vs. aftermarket: for hinges, slides, and drawer boxes, we recommend OEM PGT parts when they’re available – the bore spacing and mount geometry are exact. For soft-close dampers and plastic drawer glides, quality aftermarket equivalents (Blum, Salice, Grass) often outlast the originals and cost 20 – 30% less. We’ll show you both options and the written price for each before we touch a screwdriver.
Styles & brands we work with
Signs Your PGT Kitchen Remodeling Is Failing
- A cabinet door that won’t stay closed or closed flush. The soft-close damper has lost its fluid, or the hinge spring has fatigued. It’s a $20 – $60 fix per hinge, but if it’s happening across three or more doors, the entire hinge set is reaching end of life together.
- A drawer that grinds, sticks, or drops at the end of its travel. The ball-bearing slide has worn flat spots, or the nylon wheel has crumbled (we see this more in San Antonio’s dry, hot attics and non-climate-controlled garages where dust accelerates wear).
- Countertop seam separation near the sink or dishwasher. This is the classic Thermal Shock Signature in San Antonio. PGT’s adhesive specs were not all rated for the expansion cycles we get here in summer when an air-conditioned slab interior meets 105-degree exterior walls. The seam can’t be “re-glued” from underneath – it needs the joint re-cut and re-filled with a modern flexible epoxy.
- Delamination on the bottom edge of cabinet doors above the dishwasher. Steam escape erodes the laminate edge banding over 3 – 5 years. Replace the banding early; if the MDF core swells, the door is done and must be reordered.
- Island base cracking or pulling away from the floor. In older San Antonio neighborhoods, especially around Alamo Heights and Monte Vista, we see slab movement cause the island’s base framing to shift. This is a structural issue, not a cosmetic one – it needs to be addressed before the PGT countertop above it cracks.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full PGT kitchen remodel in San Antonio lands between $14,000 and $45,000. That range is wide because the scope is: a 10-by-10 kitchen with stock PGT boxes and a single-basin sink will sit at the low end. A 18-by-24 kitchen with an island, custom pantry, PGT aluminum-clad door replacement, and Cambria or Silestone countertops in 3cm will push toward $45,000 and beyond depending on finish choices.
Here’s how the component-level pricing breaks down in San Antonio’s current market:
| Scope | Typical Installed Range |
|---|---|
| Full PGT kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel (galley, condo, ADU) | $9,000 – $20,000 |
| Cabinet installation (PGT boxes, new run) | $4,000 – $13,000 |
| Countertop installation (Cambria/Silestone/PGT-spec quartz) | $2,000 – $6,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Backsplash installation | $800 – $2,500 |
Every quote is a written line-item price delivered before work begins. That means the number we agree on is the number on your final invoice – no change orders because we “discovered” something we should have caught in the walkthrough. Isaac Pruett is known for getting the scope of work right the first time; that habit keeps our San Antonio invoices boring, and that’s the point. The 365-Day Done Right Promise applies to every PGT kitchen remodel we complete: if the work isn’t right within a year of completion, we make it right at no cost.
DIY or Call Us?
Some PGT kitchen part failures are genuinely safe and satisfying to handle yourself, and we’ll tell you that straight: a soft-close damper swap, a plastic drawer glide replacement, or re-tightening a loose hinge plate are all jobs a careful homeowner can knock out with a Phillips head and a level. We’ll even help you order the right part.
Here’s where DIY goes wrong, and we say this with respect for the ones who’ve tried: PGT cabinet boxes are torque-sensitive. Over-driving a screw into the face-frame or drilling a new bore pattern without a jig can split the melamine, and now a $50 hinge job is a $400 door replacement. Countertop seam repair involves solvents, color-matching paste, and a cleanest-line-is-the-only-line re-cut – if you’re off by a sixteenth, you’ll see it forever. And island base failure is never a cosmetic fix; if your island is pulling from the floor, that’s a licensed job with possible slab work. Don’t learn the difference the expensive way.
Call us at (254) 269-5071. We’ll tell you over the phone whether it’s something you can handle or something we should put eyes on – and if it’s the latter, the estimate is free.
FAQs
In San Antonio’s climate, expect 12 to 18 years from PGT cabinet boxes and face frames before the hinges, slides, and edge banding start showing meaningful wear; the boxes themselves can go 25 years or more if kept dry and out of direct afternoon sun. The weak points are the soft-close mechanisms (3 – 7 years) and the countertop seams (as early as 5 years with heavy dishwasher steam exposure). Call (254) 269-5071 if you’re seeing more than one failing component – early intervention is cheaper than a full rebuild.
Yes, for most hardware: soft-close dampers, drawer slides, hinge plates, and edge banding are all repairable in place without removing the cabinet, typically for under $150 per opening. Countertop seams can be re-cut and re-filled rather than replacing the stone. If the cabinet box itself is water-swollen or delaminated, replacement is the honest answer – repair will fail again within a year. We’ll give you the written price for both options before you decide.
Most hinge, slide, damper, and edge banding swaps are completed in one visit, usually 1 to 3 hours depending on how many openings we’re touching. A full countertop seam re-cut is half a day on site plus 24 hours cure time before heavy use. A full kitchen remodel runs 3 to 8 weeks depending on scope, material lead times, and whether we’re pulling permits. You’ll get a written timeline with your written price, and a live person answers the phone at (254) 269-5071 if you need a check-in mid-project.
Yes, our San Antonio trucks carry the common PGT-compatible hardware: 35mm cup hinges in standard overlays, 18-inch and 21-inch full-extension slides, soft-close dampers from Blum and Salice, edge banding in the standard PGT finishes, and seam epoxy for quartz and granite. Uncommon series-specific parts are ordered same-day from our supplier network and typically arrive within 2 – 4 business days. If you’d like to know whether we have your exact part before scheduling, call (254) 269-5071 with the label info from inside your cabinet box.
Ready to get your PGT kitchen back to? We’ll put the price in writing before any work starts, and every crew member who arrives will have been background-checked, identity-verified, and introduced to you by name and photo before the visit. Call (254) 269-5071 to schedule your free estimate in San Antonio.
Written by Isaac Pruett, Owner, Mason Remodeling Co San Antonio at Mason Remodeling Co San Antonio, serving San Antonio and nearby areas.
