Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Kitchen Remodeling: The San Antonio Owner’s Guide
If you have an Oldcastle kitchen product with a failing component, you don’t need a phone tree, you need a straight answer on whether it can be matched, what it’ll cost, and who can install it without turning a $400 part into a $4,000 experiment. Our San Antonio kitchen remodeling team works with Oldcastle-compatible components regularly, and full replacement projects on Oldcastle-era kitchens in this market typically run $14,000 – $45,000 depending on scope. We’ll match the failing part to the right spec, give you a written price before any work starts, and have a named, photo-verified technician at your door.
Most San Antonio homeowners discover an Oldcastle component has failed the same way: a hinge binds, a drawer face cracks at the corner, a countertop seam separates, or a cabinet box starts pulling away from the wall. The first instinct is usually to find the part online and hope it fits. Oldcastle doesn’t make that simple, because most of its kitchen lines were regional builds with hardware that changed between production runs. That’s the exact problem this page is built to solve.
Key Takeaways:
- Installed replacement and remodel work on Oldcastle kitchens in San Antonio ranges from $14,000 to $45,000, with smaller repair scopes starting well below that.
- Oldcastle components often look identical across model years but use different hinge boring, drawer slide mounts, and countertop edge profiles.
- We match OEM parts when they still exist and recommend vetted aftermarket equivalents when they don’t.
- Every job gets a written price before work starts and a written guarantee stating exactly what’s covered and for how long.
Which Oldcastle Models This Applies To
Oldcastle kitchen cabinetry in San Antonio homes spans roughly three eras: early 2000s builder-grade boxes with face-frame construction, mid-2000s through early 2010s frameless lines, and a handful of semi-custom runs that pop up in homes near Alamo Heights, Stone Oak, and the Dominion. The construction era matters more than the model name. A drawer glide from a 2006 frameless Oldcastle line will not interchange with a 2014 face-frame box, even though both say “Oldcastle” on the label.
The practical way to identify what you have: open a cabinet door and look for a manufacturer sticker on the inside of the hinge-side stile. Oldcastle stamps vary by run, but you’ll usually find a series code and a date. If the sticker is gone, measure the hinge boring pattern. Oldcastle used 35mm cup hinges on most lines, but the overlay dimension, from 1/2-inch to 1-1/4-inch, determines what replacement hardware will seat correctly. We bring a full set of measurement references to every San Antonio call, because guessing at a hinge overlay is the fastest way to order a part that binds on day two.
When Oldcastle OEM parts are still produced, we order them. When the line is discontinued, which is most of them, we match to aftermarket hardware from brands like Blum, Salice, and Grass. Those aren’t downgrades. In many cases the aftermarket part outlasts what Oldcastle originally shipped, especially in Texas humidity. Mason Remodeling Co San Antonio is an independent service provider and not affiliated with Oldcastle. That independence is why we can be honest with you about which parts are worth chasing OEM and which aren’t.
Styles & brands we work with
Signs Your Oldcastle Kitchen Remodeling Is Failing
- Drawers feel like they’re dragging, even after you clean the tracks. Oldcastle used epoxy-coated metal slides on most lines, and once the coating wears through, rust starts and no amount of lubrication helps. The fix is slide replacement, and matching the slide length to the millimeter is what separates a drawer that closes from one that hangs open.
- Cabinet doors hang crooked or won’t stay closed. This is almost always worn hinge springs or bent hinge arms. On Oldcastle face-frame lines, the hinge screw holes often wallow out in the particleboard stile, so the repair has to include a boring repair or a hinge plate move, not just a hardware swap.
- A corner of the countertop has dropped or the seam has opened. Oldcastle laminate and solid-surface tops in San Antonio get hit hard by seasonal humidity swings, and if the substrate underneath was MDF, it swells and loses its bite. You can see the seam opening first at the sink run.
- Cabinet boxes are pulling away from the wall or dropping at the front. This is a structural failure, not hardware. The original install either skipped wall anchors or used screws that have since corroded. In San Antonio’s clay soil, slight slab movement makes this worse over time, and we see it most often in homes built before 2010.
- The finish is chalking or peeling at the panel edges. Oldcastle used thermofoil on many door fronts, and once the bond breaks at the profile edge, it can’t be re-adhered. You’re looking at refacing or door replacement, not a touch-up.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
San Antonio homeowners should plan on full kitchen remodeling with Oldcastle-era replacement work running $14,000 to $45,000. A smaller, targeted repair scope, like replacing a run of drawer slides, hinges, and adjusting doors, typically lands in the $300 to $900 range depending on how many openings we’re servicing. The price difference comes down to this: are we matching parts on existing boxes, refacing doors, or pulling cabinets and starting fresh?
Here’s the San Antonio market breakdown:
- Hardware-only repair (hinges, slides, drawer boxes): $300 – $900
- Cabinet installation or replacement run: $4,000 – $13,000
- Countertop installation with Oldcastle-era replacement: $2,000 – $6,500
- Backsplash installation: $800 – $2,500
- Kitchen island installation or rebuild: $3,000 – $10,000
- Full kitchen remodel (cabinets, tops, fixtures, labor): $14,000 – $45,000
Every one of those numbers includes the cost of the part, the labor, and the written price you’ll get before we start. We don’t do verbal estimates that grow into surprise invoices. Isaac Pruett writes or approves every scope of work himself, which is why change orders are rare on our San Antonio jobs. The work is covered by a written guarantee stating what’s included, what’s excluded, and for how long, starting 365 days from the completion date. If something fails because of our workmanship or a part we supplied, we come back at no charge.
DIY or Call Us?
You can safely inspect a few things yourself: find the Oldcastle sticker if it’s still there, take clear photos of the failed hardware from three angles, and measure the drawer or door width to the nearest 1/16 inch. That information helps us match the part before we even get in the truck.
What I’d tell you to pause on is anything involving cabinet box removal, wall-hung cabinets, or countertop seams. Wall cabinets are loaded with dishes and fastened under tension. If a cabinet is pulling from the wall, the failure can be structural, and the last thing you want is a full box coming down on the countertop or on whoever is standing under it. Countertop seam repair also goes sideways fast when the substrate beneath is swelling. You can’t see that without pulling the top, and once you pull it, you need the right shims, the right adhesive, and the right clamping schedule or you’ll be redoing it in six months.
If the part is something simple, a hinge or a slide, and you’re comfortable matching it exactly, go ahead. But if the failure looks structural, or if you’re not sure what failed in the first place, call us at (254) 269-5071. The estimate is free, and you’ll know exactly who is coming to your door before they arrive.
FAQs
You can expect 12 to 20 years from Oldcastle boxes in San Antonio’s climate, with the particleboard components, drawer slides, and thermofoil finishes typically failing before the boxes themselves. Humidity swings and slab movement shorten that timeline more than anything else, which is why we see more failures in older neighborhoods with expansive clay soil. If your hinges and slides are original and the kitchen is past the 15-year mark, targeted hardware replacement can buy you years. Call us at (254) 269-5071 and we’ll tell you honestly whether the part or the whole box needs to go.
Once an epoxy-coated Oldcastle slide has worn through to bare metal, it needs replacement, not repair. There is no practical way to re-coat the glide, and lubricating a rusted slide just turns sawdust and grease into a thicker paste that makes the drawer drag worse. Matching slide length and the mounting hole pattern is the real skill. Call (254) 269-5071 with a photo of the old slide next to a tape measure and we can usually quote it over the phone.
A full-run hinge and slide replacement on an Oldcastle kitchen, typically 20 to 30 openings, takes our crew one day. If the hinge screw holes are wallowed out and we need boring repairs, add half a day. A full kitchen remodel with Oldcastle-era component replacement runs 3 to 8 weeks depending on countertop fabrication and cabinet lead times. We’ll put the schedule in writing with your fixed price, and we call ahead before every visit. Call (254) 269-5071 to talk through your specific timeline.
We stock common Oldcastle-compatible hinge and drawer slide sizes on the truck, plus the aftermarket equivalents from Blum, Salice, and Grass that we use when OEM Oldcastle parts are discontinued. If the part has to be ordered, we give you the lead time in writing before any work is authorized. We also work with the same vetted material partners we use on full remodels, including KraftMaid, Cambria, and Silestone, when the answer turns out to be component replacement instead of repair. Call (254) 269-5071 and we’ll check stock while you’re on the phone.
Know who’s coming, know what it costs, know it’s covered, that’s the whole job before the job starts. If you’re in San Antonio and an Oldcastle kitchen part has failed, call Mason Remodeling Co San Antonio at (254) 269-5071 for a free estimate. We’ll match the part, give you a written line-item price, and send a background-checked technician whose name and photo you’ll have before they ever step onto your porch.
Written by Isaac Pruett, Owner, Mason Remodeling Co San Antonio at Mason Remodeling Co San Antonio, serving San Antonio and nearby areas.
