Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Kitchen Remodeling: The San Antonio Owner’s Guide
A full Kohler kitchen remodel in San Antonio typically runs $14,000 to $45,000 installed, depending on the scope, the specific Kohler fixtures and faucets you choose, and whether we’re moving plumbing or gas lines. We stock Kohler-compatible parts across the city and can usually match your existing model from the truck or our local supply partners within one business day. Most San Antonio homeowners call us after a specific failure: a kitchen faucet that drips at the base, a pull-down spray head that won’t retract, a soap dispenser that seized up, or a sink flange that’s rusted through from years of hard water.
Here’s the thing most people don’t realize until they’re standing in the plumbing aisle: Kohler makes dozens of kitchen faucet lines, and the internals are not interchangeable. The cartridge in a Kohler Sous is not the same as the cartridge in a Kohler Bellera or a Kohler Simplice. If you buy the wrong one, it won’t seat, it’ll leak, and you’ll be back at the store. That’s the problem we solve. We match the exact part to your exact model, we price it in writing before we touch anything, and we install it correctly the first time. Isaac Pruett has spent enough years on San Antonio job sites to know that a ten-minute cartridge swap can turn into a flooded under-sink cabinet if the wrong O-ring gets forced into place.
Which Kohler Models This Applies To
Our kitchen work covers the full Kohler kitchen lineup: the Sous, Bellera, Simplice, Crue, Graze, Artifacts, and Evoke faucet families, along with Kohler kitchen sinks in the Whitehaven, Riverby, and Stages lines. The identifying information you need is on the underside or back of your fixture. For faucets, look for a small tag wrapped around the supply line or etched onto the base plate, usually a four or five digit model number plus a finish code like CP for polished chrome or BN for brushed nickel. For sinks, the model is stamped on the underside of the basin.
Here’s a compatibility gotcha that saves San Antonio homeowners real money: Kohler offers both a one-hole and a three-hole option on several kitchen faucet lines, and the escutcheon plate, that deck plate that covers unused holes, is sold separately and model-specific. A Sous one-hole escutcheon will not fit a Bellera. We’ve seen people buy the right faucet and the wrong plate and wonder why it looks crooked. We keep the common decks and plates in stock for the faucets we install most in San Antonio, and we’ll tell you honestly whether an aftermarket cartridge is fine or whether your Kohler deserves the OEM part. On most Kohler kitchen faucets, the OEM cartridge is worth it; the aftermarket versions often have slightly different O-ring tolerances and start weeping within a year.
Styles & brands we work with
Signs Your Kohler Kitchen Remodeling Is Failing
- Dripping from the spout after the handle is off. In nine out of ten San Antonio kitchens, this is a worn ceramic cartridge or a failing O-ring inside the valve body. Hard water accelerates it, and San Antonio water is nothing if not hard.
- Spray head won’t stay in the dock. The counterweight on Kohler pull-down faucets is just a plastic weight clamped to the hose under the sink. Over time it slides, the hose kinks behind a garbage disposal, or the dock magnet wears out. It’s mechanical, it’s simple, and it’s maddening.
- Base of the faucet is green or crusty. That’s mineral buildup from slow, undetected seepage around the O-rings where the faucet body meets the counter. Left alone, it etches the deck and can damage the sink flange.
- Handle gets progressively harder to swing. Ceramic cartridges don’t usually bind; the culprit is more often scale inside the handle assembly or a failing diverter when you’re on the spray setting. Ignoring it means replacing more than the cartridge later.
- Low flow only at kitchen sink. San Antonio water has enough lime that the aerator or the supply-line screens clog on a predictable schedule. If every other fixture in the house flows fine and the kitchen doesn’t, it’s a blockage, not a pressure problem.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
If you’re just swapping a failed Kohler part, expect to pay less than the full remodel range; a cartridge replacement or spray-head repair typically lands in the low hundreds installed, including the part and our labor. A full faucet replacement with a new Kohler unit runs roughly $400 to $1,200 depending on the model and finish you pick. The broader $14,000 to $45,000 range covers complete kitchen remodels where Kohler fixtures and sink are part of a larger job that includes cabinets, counters, backsplash, and often plumbing re-roughing.
Every project gets a written price before any work starts. That includes the part, the labor, and any supply-line or shutoff-valve work needed to bring things up to code. San Antonio requires angle stops that actually work; we find plenty of older homes where the shutoffs are frozen open and need replacing before we can safely work. If the job changes because we find something behind the wall, you’ll know the new number before we spend another dollar. Our warranty runs 365 days from completion: if the faucet leaks or the sink settles or anything we touched fails within that year, we come back and make it right at no charge.
DIY or Call Us?
A homeowner can safely handle a few things on a Kohler kitchen setup: cleaning the aerator, checking the counterweight position under the sink, and confirming the supply valves are open. These take minutes and cost nothing. What goes wrong fast is pulling apart a Kohler valve body without the right puller tool, or overtightening a faucet nut through the sink deck and cracking the porcelain on a Whitehaven. We’ve rebuilt the consequences of a “simple YouTube fix” more times than we can count.
The honest line: if water is on the floor or dripping inside the cabinet, that’s not a parts conversation anymore. That’s a seal that’s failing where you can’t see it, and it only gets worse while you wait. Call (254) 269-5071. We’ll tell you what we think over the phone, and if it needs a visit, you’ll know exactly who’s coming, what he’ll carry in, and what the written price is before the first tool gets unloaded.
FAQs
With San Antonio’s hard water, you can expect 8 to 15 years from a ceramic-disc Kohler kitchen faucet before the cartridge needs service, and perhaps 10 to 20 from a Kohler cast-iron sink. Homes with a water softener typically sit at the top of that range. If yours failed before year five, call the parts department at (254) 269-5071; we’ll help you determine whether it’s a warranty claim or an installation issue.
Yes, in most cases the cartridge, O-rings, or spray head can be replaced for far less than a new faucet, as long as the valve body itself hasn’t cracked or corroded. If the base is pitted and weeping, repair is a temporary bandage and replacing the faucet is the honest recommendation. We’ll tell you which one applies to your sink before any money changes hands.
A cartridge or spray-head repair is usually done the same visit, under an hour. A full faucet and sink replacement is a half-day job. A complete kitchen remodel in San Antonio with Kohler fixtures, cabinets, and counters typically runs 3 to 8 weeks depending on the plumbing and electrical re-roughing involved.
We keep the most common Kohler cartridges, spray heads, and mounting hardware in stock for the faucet lines we service most, and our supply partners across San Antonio can source less common parts within one business day. We’re an independent service provider and not affiliated with Kohler, but we carry genuine Kohler components alongside brands like KraftMaid, Cambria, and Silestone for the surrounding remodel.
Know who’s coming, know what it costs, know it’s covered, that’s the whole job before the job starts. Call (254) 269-5071 to schedule your free estimate for a Kohler kitchen repair or full remodel in San Antonio.
Written by Isaac Pruett, Owner, Mason Remodeling Co San Antonio at Mason Remodeling Co San Antonio, serving San Antonio and nearby areas.
