Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Blanco Kitchen Remodeling: The San Antonio Owner’s Guide
Blanco kitchen remodeling in San Antonio typically runs $14,000 to $45,000 for a full overhaul, and most Blanco owners call us when a sink flange fails, a faucet cracks at the base, or cabinetry around the Blanco unit has swelled from a slow leak. We stock Blanco-compatible parts on our trucks and can usually match your model the same visit. The short version: if your Blanco sink, faucet, or the cabinet work around it is failing, we can source the right part, price it in writing before any work starts, and install it without turning your kitchen into a construction zone for weeks.
Most San Antonio homeowners discover the problem the hard way. A drip that never quite stops under the Blanco sink. A faucet that suddenly won’t swing. A countertop seam opening where the Blanco undermount meets the stone. Sometimes it’s a remodel gone wrong by a previous contractor, sometimes it’s just a decade of hard water and heat. Either way, the fix usually costs far less than a full kitchen replacement, and that’s where we start.
Which Blanco Models This Applies To
Blanco makes several sink lines that show up regularly in San Antonio kitchens, and the part you need depends on which one you have. The Blanco Performa series uses a different drain assembly than the Blanco Precis or Blanco Diamond lines. The Blanco Culina faucet line has cartridge specs that differ from the older Blanco Linus faucets. If you’re not sure which model you own, look under the sink basin for a stamped model number, or check the original paperwork from the remodel. No paperwork? We can identify it on site.
The OEM-vs-aftermarket decision matters more with Blanco than with most brands. Blanco’s OEM drain kits and cartridges are engineered to tight tolerances, but quality aftermarket equivalents from manufacturers we trust often cost 30 to 40 percent less and hold up the same in San Antonio’s hard water. We’ll show you both options with real numbers and let you decide. One compatibility gotcha: Blanco sink grids are model-specific. A grid from a Blanco Diamond will not seat properly in a Blanco Precis, even if the basin dimensions look close. We see that mistake often enough that we always verify before ordering.
Mason Remodeling Co San Antonio is an independent service provider. We’re not affiliated with Blanco, but we work with their products daily and keep the most common failure parts in stock.
Styles & brands we work with
Signs Your Blanco Kitchen Remodeling Is Failing
- Persistent drip under the sink. The rubber gasket between the Blanco drain assembly and the basin degrades over time, especially in San Antonio’s hard water, and the seal eventually gives out. You’ll see water staining on the cabinet floor before you see an actual puddle.
- Faucet handle sticks or won’t turn smoothly. Mineral buildup inside the cartridge is the usual culprit, and Blanco cartridges are particular. Forcing the handle usually cracks the internal stem and turns a $60 repair into a $300 faucet replacement.
- Sink rim separates from the countertop. The undermount clips or adhesive that hold a Blanco sink to stone or quartz fail slowly. Once you can slip a fingernail between the sink flange and the counter, water is getting into the cabinet and the seam will only get worse.
- Water staining on the cabinet face or floor. This is the late-stage symptom of a failed drain seal or a cracked supply line. By the time staining is visible, the cabinet base may need repair or replacement, which pushes the job from a parts swap into modest cabinet work.
- Rust or pitting on the sink surface. Blanco stainless sinks resist corrosion well, but harsh chemical cleaners and standing water with high mineral content will eventually break down the surface. Once pitting starts, it spreads, and the sink needs replacement rather than repair.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Full Blanco kitchen remodeling in San Antonio runs $14,000 to $45,000 depending on scope. But most readers landing on this page don’t need a full remodel, they need a targeted fix. Here’s what we typically see in the San Antonio market:
- Blanco drain assembly replacement: $150 to $400 installed, part included.
- Blanco faucet cartridge replacement: $120 to $300 installed, part included.
- Blanco faucet replacement: $400 to $1,200 installed, depending on model and finish.
- Blanco sink replacement: $800 to $2,500 installed, including undermount re-seating and plumbing reconnection.
What drives the range? The model you own, whether the countertop needs to be cut or re-sealed, and whether any cabinet or drywall work is required. Every price we quote is written before work starts, in dollars, with the part and labor separated. No verbal estimates that grow on the final bill. Every completed job carries our 365-Day Done Right Promise: if it’s not right within a year, we make it right at no cost to you.
DIY or Call Us?
Some things you can safely check yourself. Confirm the model number under the basin. Shut off the water supply and look for an obvious crack in the supply line or a loose drain nut. Wipe down the sink and see if the drip returns. That tells us a lot before we even arrive.
What you should not DIY: anything involving the countertop seal, the undermount clips, or a faucet cartridge on a Blanco model you can’t identify with certainty. The cartridge is easy to crack, and the undermount is not a homeowner-level fix. We’ve repaired enough botched DIY Blanco repairs in San Antonio that we’d rather you call us first. A ten-minute phone call usually saves you money. Call (254) 269-5071 and describe what you’re seeing. We’ll tell you if it’s worth a service visit or if you can save the trip.
FAQs
A properly maintained Blanco stainless sink typically lasts 15 to 20 years in San Antonio homes, though hard water scale and abrasive cleaners can shorten that. The drain gaskets and faucet cartridges will fail sooner, usually between 5 and 10 years, and those are the parts we replace most often.
Faucet cartridges can almost always be replaced rather than repairing the whole faucet, and that’s usually the cheaper fix. Sink basins with rust or deep pitting cannot be repaired reliably, and anything below the counter affecting the seal should be replaced rather than patched. Call (254) 269-5071 and we’ll give you an honest read before you spend anything.
Most drain assemblies and cartridges are swapped in under two hours, and we usually complete the work in a single visit. Sink replacements that involve countertop re-sealing take most of a day because the sealant needs cure time before water runs through it again.
We stock the most common Blanco drain gaskets, cartridges, and mounting hardware on our trucks, along with compatible parts for KraftMaid cabinetry, Cambria and Silestone surfaces. Less common Blanco models may require a one to two day order, and we’ll tell you upfront if that’s the case before any work is scheduled.
If your Blanco kitchen is failing and you want the part matched, the price in writing, and the work covered, call (254) 269-5071. We’ll set up a free estimate, confirm who’s coming before they arrive, and give you a written price before any tool is unpacked. Know who’s coming, know what it costs, know it’s covered, that’s the whole job before the job starts.
Written by Isaac Pruett, Owner, Mason Remodeling Co San Antonio at Mason Remodeling Co San Antonio, serving San Antonio and nearby areas.
