Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Driveway & Pavers: The San Antonio Owner’s Guide
We stock and install ActiveYards-compatible driveway and paver components across San Antonio, with typical installed replacement work running $250 to $18,000 depending on whether you’re replacing a single damaged paver, a section of edging, or the entire driveway surface. Most owners discover a problem the same way: a paver shifts underfoot after a heavy rain, an edge restraint pulls loose along the lawn line, or a low spot appears where water pools after every storm. If your ActiveYards hardscape is showing any of those signs, the fix is usually straightforward, but matching the right material to your existing layout is where mistakes get expensive.
Call (254) 269-5071 and we’ll tell you what you’re looking at before anyone schedules a visit.
Which ActiveYards Models This Applies To
ActiveYards driveway and paver systems run across several product families, and the compatibility gotcha in San Antonio is almost always the paving grid size. ActiveYards offers paver layouts in modular patterns that interlock with specific edging profiles. If you buy a replacement paver that’s off by even 3/8 inch, the pattern won’t seat correctly and you’ll have visible gaps within a season. Before you order anything, check the underside of one of your existing pavers for a molded part number. If it’s faded or unreadable, measure the paver’s width and depth in inches; that measurement narrows the series down quickly.
OEM ActiveYards pavers are the safest match for color and dimensional accuracy, especially on driveways that have been sun-faded for a few summers. Quality aftermarket equivalents exist for edging restraints and base grid systems, but we generally steer San Antonio customers back to OEM pavers when the driveway has a visible pattern: any color drift reads immediately at the curb line. The good news is we can usually identify what you have from a photo, a measurement, and the age of the install.
We are an independent service provider, not affiliated with ActiveYards. We stock ActiveYards-compatible driveway and paver materials, which means you get the right fit without waiting on a manufacturer lead time. We also stock parts for KraftMaid, Cambria, and Silestone systems, so if your project touches more than one surface, one call covers it.
Styles & brands we work with
Signs Your ActiveYards Driveway & Pavers Is Failing
- Pooling water in the same spot after every rain. A low spot means the base beneath the pavers settled or washed out. In San Antonio’s clay-heavy soil, this is the most common failure we see, especially after the wet season shifts from drought to downpour.
- A paver that rocks or shifts when you step on it. That’s a sand-bed erosion issue under a single unit. Left alone, the edges of the surrounding pavers start chipping and the damage spreads outward.
- Edge restraint pulling away from the lawn or flower bed. The plastic or aluminum edging that holds the perimeter has lost its anchor. Once one section goes, the pavers at the edge start creeping outward and the pattern opens up.
- Sun-faded color with visible aggregate on the surface. ActiveYards pavers hold color well, but a decade of Texas sun will lighten any manufactured paver. Surface erosion means the paver’s protective face layer is wearing thin and water intrusion is next.
- Weed growth between joints. Polymetric sand has failed or was never compacted correctly. Weeds and ant colonies are a sure sign the joint sand is not locking the pavers in place anymore.
Any one of these is a repair call. Two or more usually means the base layer needs attention, not just a surface patch.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here is what ActiveYards driveway and paver replacement work runs in San Antonio, installed:
| Service | Installed Price Range |
|---|---|
| Single paver replacement or edge repair | $250 – $700 |
| Sectional paver repair (up to 200 sq ft) | $1,500 – $4,500 |
| Paver driveway installation (new) | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Driveway replacement (full tear-out and rebuild) | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
The spread comes down to three things: square footage, how much base material needs to be replaced once we open the surface, and whether the existing layout allows us to match the pattern at the edges. Every quote we write includes the parts, the labor to remove and reset properly, new joint sand, and compaction. You get the written price before any work starts, exactly as it will appear on the final invoice. The one-year 365-Day Done Right Promise applies to any ActiveYards driveway or paver work we complete: if something isn’t right within 365 days of completion, we make it right at no cost to you.
Call (254) 269-5071 and we’ll give you a range for your specific layout.
DIY or Call Us?
For a single cracked paver or a loose edge, a confident homeowner with a rubber mallet and fresh joint sand can make a real improvement in an afternoon. The part of this work that goes wrong in San Antonio is the base. Our clay soil swells when wet and cracks when dry, and if you reset a paver on top of a bad base, you’ll be looking at the same problem in six months. Lifting an entire driveway section, rebuilding the aggregate base, and compacting in lifts is not a weekend job; it’s heavy, repetitive labor that requires a compactor, a laser level, and someone who knows what good compaction feels like underfoot.
If the area is larger than about 50 square feet, or if water has been pooling for more than one season, call us at (254) 269-5071 before you spend money on materials. We’ll tell you honestly whether it’s a DIY fix or a crew job.
FAQs
ActiveYards pavers typically last 20 to 30 years in San Antonio when installed over a properly prepared base. The pavers themselves rarely fail first; the base and joint sand are what wear out in our climate, usually within 10 to 15 years if the original install was done thin. Call (254) 269-5071 for a site assessment and we’ll tell you how much life your current base has left.
Sometimes. A chip along a joint line can often be reset and re-sanded, but a paver with a crack through its body or surface erosion from sun exposure is past repair and should be swapped for a matching unit. The call on repair versus replace comes down to where the damage sits in the pattern and how visible the flaw is. Send us a photo and we’ll give you a straight answer.
A single-paver swap or edge repair takes one visit, usually two to four hours. A sectional repair with base work runs one to two days. A full driveway install in San Antonio typically takes three to five working days from tear-out to final compaction, weather permitting.
We stock the most common ActiveYards edging, grid, and replacement paver profiles at our San Antonio location, and we can source less common units from our supplier network within a few business days. Before you buy anything material, confirm the part number with us so you don’t end up with a near-match that shows at the seam. Call (254) 269-5071 and we’ll check what’s on the shelf.
Written by Isaac Pruett, Owner, Mason Remodeling Co San Antonio at Mason Remodeling Co San Antonio, serving San Antonio and nearby areas.
