Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Windows & Doors: The San Antonio Owner’s Guide
We stock and install ActiveYards-compatible window and door components for San Antonio homeowners, with most replacement parts and full window or door swaps running from $450 to $4,500 installed depending on whether you need a single latch assembly or an entire door panel. Most common hardware replacements (rollers, latches, weather stripping, screen frames) go in same-week, and full door or window replacements are typically scheduled within 7-10 days. How most people find us: a screen door that suddenly drags across the track, a window that won’t stay locked, or a door panel that’s gone chalky from ten San Antonio summers.
ActiveYards builds aluminum-framed doors and windows, and the Texas sun is hard on that hardware. We see two failure patterns most often. First, the nylon rollers under sliding doors flatten or crack, usually within 6-8 years of installation in full western exposure. Second, the latch assemblies and strike plates work loose as the aluminum frame expands and contracts through consecutive 100-degree summers. If your ActiveYards door or window is sluggish, noisy, or won’t seal tight, that’s the part failing, not the whole unit.
Key Takeaways
- Most ActiveYards door and window hardware (rollers, latches, locks, weather stripping) can be replaced without pulling the entire frame.
- Typical installed hardware repair in San Antonio: $450 – $1,200. Full door or window replacement: $2,500 – $4,500.
- We’re an independent provider, not affiliated with ActiveYards, but we match OEM and quality aftermarket parts to your specific series.
- Every job gets a written price before work starts, and every completed repair is covered for 365 days.
Which ActiveYards Models This Applies To
ActiveYards has been sold primarily through independent dealers, and over the years the product line has shifted names and series designations more than most window and door brands. The practical issue for a San Antonio homeowner is that the model name printed on your original invoice often doesn’t match the label on the frame. That label, usually a small silver or white sticker on the top or bottom rail of a sliding door or the hinge-side jamb of a window, carries the actual series code.
We work on ActiveYards Classic, Advantage, Elite, and Grandview series doors, plus their sliding and single-hung window lines, but the label is what tells us what’s actually compatible with your opening. ActiveYards changed roller sizes, track profiles, and latch spacing between series over the years, and a door labeled “36 x 80” can take two different roller assemblies depending on whether it was built before or after about 2015. That’s the biggest compatibility gotcha we run into: the frame size is the same, but the internal hardware is not. We verify part fit from the label and measurements before ordering anything.
When it comes to OEM versus aftermarket for ActiveYards, here’s our honest take. ActiveYards OEM parts are still available for most current and recent series, and they’re the right call for anything structural: door panels, window sashes, frame pieces. For consumable hardware like rollers, latches, and weather stripping, we often use quality aftermarket equivalents from Prime-Line or similar suppliers, because they match or beat OEM on materials (stainless steel bearings instead of zinc, in some roller assemblies) at a lower parts cost. You’ll see both options itemized on your written estimate.
Styles & brands we work with
Signs Your ActiveYards Windows & Doors Is Failing
- The door grinds or skips when you slide it. A flattened or cracked roller is dragging on the track, and every slide is wearing a groove into the aluminum rail. The longer it goes, the more likely the track needs replacement too.
- The deadbolt or latch won’t fully engage. The door has settled or the frame has shifted enough that the latch and strike plate no longer line up. This is a security issue on a back door, not a nuisance.
- You can feel outside air or see daylight around a closed window or door. The weather stripping has compressed to the point of failure, or the panel has dropped out of square. Your HVAC bill in July tells you exactly how much that gap is costing.
- The aluminum finish is pitting or flaking, especially on the west-facing side of the house. Once the powder coating fails, the aluminum underneath starts oxidizing. It’s cosmetic at first, then becomes a structural problem on frames.
- The screen door falls off its track mid-roll. The top roller assembly or the spring-loaded top guide has failed. This is the one failure homeowners try to live with longest, and it usually ends with a bent screen frame that costs more than the roller repair would have.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed prices in San Antonio for ActiveYards hardware and component replacement break down like this:
- Roller or latch replacement (single door): $180 – $350 parts and labor
- Full hardware refresh on one sliding door (rollers, latch, weather stripping, adjustment): $450 – $800
- Screen door frame and mesh replacement: $250 – $600 depending on size
- Window sash replacement (glass and frame section): $400 – $900 per sash
- Full ActiveYards door replacement (standard 36×80 slider): $2,500 – $4,500 installed
- Full ActiveYards window replacement (standard double-hung or slider): $800 – $1,800 per window, depending on size and glass package
Every line on your written estimate separates parts from labor, so you can see exactly what you’re paying for. The work is covered by our 365-Day Done Right Promise: if something we installed fails within a year, we come back and make it right at no cost. If you need us to inspect a door that’s giving you trouble before you commit to a repair, we’ll do that as part of the estimate at no charge.
DIY or Call Us?
Here’s where we draw the line, and we draw it honestly. Adjusting a latch plate, cleaning and lubricating a track, replacing weather stripping: those are reasonable homeowner tasks if you have a screwdriver and patience. We’ll even tell you which parts to buy over the phone.
Replacing rollers on a sliding ActiveYards door means lifting a tempered glass panel that typically weighs 80 to 120 pounds, releasing it from a spring-loaded top guide, and working on your back with the panel over your head. That’s the moment we’d rather you call us. Tempered glass doesn’t break often, but if it does while you’re under it, you’re not walking that off. The same applies to full sash and panel replacements. If the part is heavy, under tension, or requires matching new hardware to an older track profile, call (254) 269-5071 and we’ll send a crew that does this every week.
FAQs
In San Antonio’s climate, expect 6-8 years from original nylon rollers on a door that gets daily use in a west- or south-facing exposure. Latches and weather stripping run about the same. Doors on shaded north-facing porches can go 12-15 years before hardware fails.
Latch plates and strikes can often be adjusted and refastened as a repair. Rollers, weather stripping, and broken latch springs are replacement items; there’s no repair path that lasts. We’ll make that call on site and show you what we’re looking at before we write the estimate.
Most single-door hardware replacements (rollers, latch, weather stripping, realignment) are done in 60-90 minutes. A full door or window sash replacement runs half a day including disposal of the old panel. You’ll have a written timeframe before we start.
We stock common roller sizes, latch assemblies, and weather stripping profiles for ActiveYards doors and windows on our service trucks. Odd series-specific glass panels or frame pieces get ordered from our supplier, typically 3-5 business days. If we have the part on hand, we’ll finish the repair on the first visit.
Call (254) 269-5071 to schedule a free estimate on your ActiveYards window or door repair. You’ll know exactly who’s coming, exactly what it costs, and exactly what’s covered before any work starts.
Written by Isaac Pruett, Owner, Mason Remodeling Co San Antonio at Mason Remodeling Co San Antonio, serving San Antonio and nearby areas.
