Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Fence Installation: The San Antonio Owner’s Guide
PGT fence installation in San Antonio typically runs $3,500 to $9,000 for a complete vinyl fence system, and we carry PGT-compatible fence components on our trucks for same-week installation in most cases. Most homeowners call us after discovering a cracked panel, a leaning post, or a gate that no longer closes square. PGT makes a solid fence product, but San Antonio’s clay-heavy soil and summer heat expose any installation flaw within a few seasons. We can usually get a full fence installed within five to seven business days once material is confirmed.
Which PGT Models This Applies To
PGT’s fencing line covers several vinyl fence series, each with different post sizes, panel thicknesses, and gate hardware. The most common in San Antonio are the 6-foot privacy panels with 5×5 vinyl posts and the 4-foot semi-privacy styles used around pools. You’ll usually find a PGT product sticker on the inside of a gate post or along the top rail of a panel. If the label is gone, measure the panel’s overall thickness at the top rail. PGT privacy panels are generally 1.5 to 1.75 inches thick, where cheaper box-store panels are only an inch. We always start by confirming the existing series so the new panels match the post routing profile. Mixing a PGT panel with a generic aftermarket post often leaves a visible seam and a weaker corner connection. That’s one reason we default to OEM PGT fence components. Aftermarket options exist for simple rail and picket repairs, but for full replacements, OEM parts are the safer call for straight sight lines and a square gate.
Styles & brands we work with
Signs Your PGT Fence Installation Is Failing
- Leaning posts after heavy rain. San Antonio’s black clay expands when wet, pushing posts around. If a post moves more than an inch out of plumb, the concrete footing has likely cracked or was too shallow from the start.
- Panels separating at the top rail. Heat makes vinyl expand. When the original install didn’t leave enough expansion gap between panels, the top rails bow and the panels pull apart at the seams.
- Gate scraping the ground or sticking. This is almost always a post shifting, not a hinge problem. The post the gate hangs on takes the load every time someone swings it. Once it tilts, no hinge adjustment fixes the geometry for long.
- Cracks radiating from a post corner. Vinyl gets brittle under constant UV exposure. If a corner cracks, it’s usually more than cosmetic. Water gets inside, then freezes during a rare Texas cold snap and splits the post further.
- Yellowing panels in direct afternoon sun. White and tan vinyl both fade eventually. More important, severe yellowing often means the UV inhibitors in that section’s material are failing, which shortens the panel’s remaining life.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
San Antonio homeowners can expect to pay $3,500 to $9,000 for PGT fence installation depending on linear footage, gate count, post condition, and access. At the low end, that covers a short run with one gate on flat ground where the existing posts are still sound. At the high end, you’re looking at a full perimeter with multiple gates, posts that need new concrete footings, and a lot of panels. Our written price before work starts includes all material, concrete, hardware, haul-away of the old fence, and labor. No surprise change orders, no verbal estimate that creeps toward settlement day. Every PGT fence installation we complete in San Antonio is covered by the 365-Day Done Right Promise: if any part of that fence isn’t right within a year of completion, we come back and make it right at no cost to you.
DIY or Call Us?
Replacing a single picket or tightening gate hinges is something a capable homeowner can handle on a Saturday. Setting new posts in San Antonio clay, however, is where most DIY fence projects go sideways. The hole needs to be deep enough to get below the active clay layer, which can mean digging 30 to 36 inches depending on the neighborhood. Get that wrong and you’ll be back out there after the next big rain, trying to straighten a post that has walked. A fence is a wind sail, not just a privacy screen. Every post is carrying real lateral load. If your fence is more than a few years old and the posts are moving, the right answer is usually full panel and post replacement, not another patch job. Call (254) 269-5071 and we’ll send someone out to look at the whole run and give you a written price before any work starts.
FAQs
A properly installed PGT vinyl fence in San Antonio typically lasts 20 to 25 years. The biggest threats here are UV exposure on the west-facing runs and soil movement from the region’s expanding clay, which wears down post footings faster than the vinyl itself degrades.
Yes, if the failure is limited to a few panels or a single post, repair is often the right call. We’ll replace the damaged PGT panels with matching series parts and reset any loose posts. If the failing sections make up more than a third of the fence line, full PGT fence installation usually ends up cheaper per foot than repeated callouts. Call (254) 269-5071 and we’ll give you a straight answer either way.
A typical San Antonio PGT fence installation takes two to four working days from start to finish. Most of that time is post-setting and waiting for concrete to cure, not panel work. You’ll have a written timeline before we start.
We stock common PGT fence panels, post caps, gate kits, and hinges on our trucks, so small repairs can often be handled the same visit. For full fence replacements, we order the exact PGT series and color match the day the estimate is approved.
Written by Isaac Pruett, Owner, Mason Remodeling Co San Antonio at Mason Remodeling Co San Antonio, serving San Antonio and nearby areas.
