Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Silestone Driveway & Pavers: The San Antonio Owner’s Guide
Mason Remodeling Co San Antonio stocks and installs Silestone-compatible driveway and paver components, with most replacements in San Antonio running between $7,000 and $18,000 for full paver driveway installation and $250 to $700 for sealing and surface restoration work. We keep common Silestone paver sizes, edge restraints, jointing sand, and sealer on our trucks, so a crew can usually assess your driveway the same day you call. Most San Antonio homeowners discover they need this work after a heavy rain season: pavers shift, sand washes out, or a section sinks where the decomposed granite base finally gave out after years of July heat and August downpours.
Which Silestone Models This Applies To
Silestone’s hardscape line runs in two families you’re likely dealing with in San Antonio: the solid-surface paver tiles used over concrete (common in patio and pool deck applications) and the thicker 60mm and 80mm paver blocks meant for driveways. The good news is that replacement parts don’t need a serial number the way a cabinet hinge does. What matters is paver thickness, face dimension, and edge profile. Bring us a photo of the failed paver next to a tape measure and we can usually match it from the truck. You’ll also want to know whether your Silestone surface was sealed at installation. Most San Antonio driveway failures are not the paver itself but the base underneath. We see this constantly in neighborhoods like Stone Oak and Alamo Heights, where clay soil expands in the wet season and shrinks dry in the summer, cracking the bedding sand layer and leaving pavers wobbling.
One compatibility note before you order parts online: Silestone driveway pavers sold for interior or vertical applications are often cut to 20mm thickness, and those will not survive vehicle traffic over a San Antonio summer. You need the 60mm minimum for driveways. We carry both OEM Silestone replacement pavers and quality aftermarket equivalents from Belgard and Unilock that match common Silestone color lines. Mason Remodeling Co San Antonio is an independent service provider and not affiliated with Silestone, but we have installed and repaired their hardscape products across San Antonio for years and know which substitutions hold up and which don’t.
Styles & brands we work with
Signs Your Silestone Driveway & Pavers Are Failing
- Rocking or wobbling pavers underfoot. The bedding sand has washed out beneath the paver, usually because an edge restraint failed or water is getting under the surface. Left alone, the paver will eventually crack.
- Sinking sections, especially near the garage apron or curb. This is almost never the paver. The decomposed granite or crushed limestone base has compacted unevenly, common in San Antonio’s clay-heavy soils after wet winters.
- White haze or chalky residue across the surface. Efflorescence, or more commonly in Texas, sealer breakdown from UV exposure. A worn sealer lets water penetrate the paver face and accelerates freeze-thaw and salt damage.
- Weeds or grass pushing up between joints. The jointing sand has thinned to nothing. Polymeric sand should lock joints for years; once weeds root through, water follows and the base starts eroding.
- Crumbling edges or corner spalling on individual pavers. Usually impact damage from a vehicle or a dropped tool, but it means the paver’s structural shell is compromised and water is getting to the core.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what you can expect to pay in San Antonio for Silestone driveway and paver work, parts and labor included:
- Paver driveway installation (new): $7,000 – $18,000 depending on square footage, base condition, and paver style.
- Driveway replacement (tear out and reinstall): $5,000 – $14,000.
- Paver patio installation: $3,500 – $11,000.
- Driveway sealing or joint sand replacement: $250 – $700.
The range comes down to three things: how much base repair the soil needs, whether we’re replacing a few pavers or the whole surface, and access. A driveway in a tight San Antonio lot with no side yard access takes longer because material has to be wheeled, not driven, to the back. Every quote includes a written line-item price before we start, and the work is covered by our 365-Day Done Right Promise: if something isn’t right within a year of completion, we make it right at no cost to you.
DIY or Call Us?
A homeowner can safely re-sand minor joints and spot-seal a small area. You can also pull up a single rocking paver, check whether the sand base is still there, and reset it. What goes wrong in San Antonio is when a homeowner tries to fix sinking sections by adding sand on top. That masks the problem for a month, then the base keeps settling and now you have a low spot full of loose sand. If more than three pavers are moving, or you see a visible depression, the base is failing and that means excavation. You need a compactor, proper base material, and someone who knows how thick the lift needs to be for our clay. We’re glad to assess it for free. Call (254) 269-5071 and describe what you’re seeing; we’ll tell you over the phone whether it sounds like a base problem or a surface fix.
FAQs
A properly installed Silestone paver driveway over a correctly compacted base lasts 25 to 30 years in San Antonio, though the sealer typically needs renewal every 3 to 5 years due to our UV exposure. The pavers themselves rarely fail first; the base and edge restraints do. Call (254) 269-5071 and we’ll look at yours for free.
Small edge chips can sometimes be cosmetically filled, but a cracked driveway paver should be replaced; any crack through the paver body will widen with vehicle loads and San Antonio’s seasonal ground movement. Replacing a single paver is straightforward and we often have matching pavers on the truck. Call (254) 269-5071 for an exact quote.
Single paver replacement or joint re-sanding is usually a half-day job. A full driveway overhaul with base excavation runs 3 to 5 days for a typical San Antonio two-car driveway. We’ll give you a written schedule before work starts.
We stock common Silestone paver dimensions and colors on our trucks for same-day single-paver swaps, and we can order less common sizes through our supplier network, usually arriving within a week. If we don’t have it, we’ll tell you before you wait around. Call (254) 269-5071 with your paver measurements.
Written by Isaac Pruett, Owner, Mason Remodeling Co San Antonio at Mason Remodeling Co San Antonio, serving San Antonio and nearby areas.
