Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Fence Installation: The San Antonio Owner’s Guide
If you have a KraftMaid fence system that’s leaning, separating at the posts, or outright failed, we stock the hardware and panels to bring it back to square and plumb. A full KraftMaid fence installation in San Antonio typically runs between $3,500 and $9,000 depending on the linear footage, post condition, and whether we’re reusing existing panels or replacing sections outright. Most San Antonio owners discover the problem after a heavy thunderstorm, when the clay soil shifts and suddenly a post is kicked out six inches or a gate won’t latch.
What you’re experiencing isn’t unusual. San Antonio’s expansive clay soil, combined with our flash-flood summer rain patterns, works posts loose over time. The fence might have looked fine in March and be visibly leaning by August. We’ve replaced enough KraftMaid-style aluminum and vinyl fencing across the city to know exactly what fails first and what’s worth saving.
Which KraftMaid Models This Applies To
KraftMaid is best known for cabinetry, but their outdoor fence line shows up in a lot of San Antonio communities built between roughly 2005 and 2015, particularly in neighborhoods like Alamo Ranch, Stone Oak, and parts of the far West Side. Most of what we see is their aluminum spear-top and flat-top panel systems, usually in black or bronze finish, with matching gate frames and hardware.
The compatibility gotcha: KraftMaid fence panels are not interchangeable with off-the-shelf big-box panels. Their post dimensions run slightly narrower than standard, and the panel brackets slide into a routed channel rather than screwing through the face. Before you buy anything online, measure the inside-to-inside post opening at three heights: top, middle, and bottom. If those three numbers differ by more than a quarter inch, the posts have drifted and you’ll need post work before any panel goes in.
As an independent service provider, we’re not affiliated with KraftMaid. For OEM replacement parts, availability depends on the series and manufacturing year. For common failures like gate hinges, latch strikes, and post caps, we carry quality aftermarket equivalents that match the OEM spec or exceed it. For panel sections, OEM is usually the right call when it’s still obtainable, because the finish match matters more than you’d think sitting on a screen.
Styles & brands we work with
Signs Your KraftMaid Fence Installation Is Failing
- Gate sagging or dragging on the latch side. The hinge post has leaned out of plumb, usually because the post footer wasn’t deep enough for San Antonio soil. Tightening the hinge screws helps for a week, then it’s dragging again.
- Panels rattling in high wind. The panel brackets have stretched or pulled away from the posts. Left alone, a good March windstorm will fold a panel right out of the frame.
- Post caps cracked or missing. UV exposure and hail take these out first. Once a cap is gone, water gets inside the post, and Texas sun bakes the interior until the post itself fails.
- Fence line wavy between sections. This means the posts are moving independently. The fix is resetting the problem posts, not shimming panels.
- Gate won’t stay latched even after adjustment. The latch strike has worn or the gate frame has racked. If the frame is racked, the gate needs to come off and be re-squared.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In San Antonio, a KraftMaid fence installation runs between $3,500 and $9,000 installed. The range comes down to four things: how many linear feet need replacing, how many posts need resetting versus reusing, whether we’re replacing the full section or salvaging existing panels, and gate hardware condition. A partial fix like resetting four posts and hanging two new panels lands at the lower end. A full perimeter replacement with a new gate sits at the higher end.
Every quote is a written line-item price before any work starts. That means you’ll see the panel cost, post cost, concrete, hardware, and labor separated out. We don’t bundle a “fence package” number and call it a day, and we don’t send a change order after we start digging. The workmanship warranty covers the installation for 365 days from completion. If a post shifts or a gate sags within that year, we come back and fix it at no charge.
DIY or Call Us?
What you can safely do at home: check whether the posts are solid in the ground, spray down the hinges with a dry lubricant, and temporarily shim a gate latch so it closes while you decide on the real fix. What we’d caution against is pulling posts and re-pouring footers yourself. It’s not that it’s dangerous in the way electrical work is; it’s that San Antonio clay makes the job unforgiving. A footer dug to 18 inches when it should be 24 will be leaning again in six months, and now you’ve spent a Saturday and still need the repair done right.
If the posts are still solid and the panels are in good shape, we can often repair the section in one visit. If the posts are moving, the honest answer is that a partial fix buys you time, not a permanent fence. Call us at (254) 269-5071 and we’ll walk you through what we’re seeing on your side of town and what it costs to make it right.
FAQs
With proper installation and post depth, an aluminum or vinyl KraftMaid fence in the San Antonio area should last 15 to 20 years before you’re looking at real structural work. What fails earlier is the hardware: gate hinges and latch strikes typically show wear around year 7 to 10, especially on gates that get daily use. Call (254) 269-5071 and we can tell you quickly whether you’re looking at a hardware replacement or a post problem.
Yes, in most cases a failing section can be repaired if the posts are still structurally sound. We reset posts, re-hang panels, and replace hardware routinely across San Antonio. What forces a full replacement is widespread post failure or panels so UV-damaged that the new sections would stand out badly against the old. A free estimate gives you the exact answer for your fence.
A typical multi-section fence installation in San Antonio is a one to two day job for our crew. Post removal and concrete setting take most of the first day. If we’re working around existing landscaping or digging through rocky ground on the northwest side, it can stretch to a third day, but we’ll tell you that before we start.
We stock common replacement hardware on the truck: gate hinges, latch strikes, post caps, and bracket kits that meet or exceed KraftMaid’s original spec. If you need an OEM panel section for an exact finish match, we’ll source it and include it in your quote before we ask you to commit. You won’t be chasing parts on your own.
Whether you’re in Alamo Heights with a single failed section or out near Helotes with a whole perimeter leaning, give us a call at (254) 269-5071 to schedule your free estimate. We’ll get you a written price with the parts broken out, so you know exactly what you’re paying for before any digging starts.
Written by Isaac Pruett, Owner, Mason Remodeling Co San Antonio at Mason Remodeling Co San Antonio, serving San Antonio and nearby areas.
