Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Construction in Selma, TX | Mason Remodeling Co San Antonio
We’re Mason Remodeling Co San Antonio, your General Contractor in Selma, and we provide independent PGT window, door, and construction service across Selma, Texas. We’re not a manufacturer-authorized dealer, and we don’t pretend to be one. What we are is a full-service remodeler who has installed and repaired more than a hundred PGT impact units along the I-35 corridor, which means we know exactly where factory specs, HOA rules, and Selma’s specific climate all collide. Call (254) 269-5071 for a free estimate on any PGT repair, replacement, or installation.
Why Selma Residents Choose Us for PGT Service
Selma has grown from a small railroad stop into one of the busiest development corridors northeast of San Antonio. That growth has put a lot of PGT windows and doors into tract homes, townhomes, and light-commercial buildings. The problem is that most window companies treat PGT work as a simple swap-and-go job. We don’t, because we’ve seen what happens when a shortcut meets a Selma hailstorm or a slab that’s still settling. Isaac Pruett, our owner, trained in construction at Los Angeles Trade-Technical College and has spent two decades swinging hammers across the Southwest. He’s the one who reminds our crews that a PGT impact window is a system, not a pane of glass in a frame. Every service call starts with that mindset.
Our team arrives in marked uniforms, with photo ID badges, and you’ll get the technician’s name and photo before the visit. A written price comes before any work starts, and every job is backed by our 365-Day Done Right Promise: if something’s not right within a year of completion, we make it right at no cost.
Styles & brands we work with
Common PGT Construction Problems We Solve in Selma
These are the failures we actually see in Selma, not the generic list from a manual. Each one is tied to a specific local condition.
- Shattered outer glass on PGT WinGuard vinyl units after spring hailstorms. Older WinGuard windows with annealed glass rather than impact-rated laminated glass often lose the outer pane during storms that roll through Selma between March and May. The inner laminate holds, which is good, but the window is no longer weathertight. We replace the sash pack with a direct-match PGT OEM unit so the design pressure rating stays intact.
- Seal failure on PGT 7700 casement sashes on south-facing walls. South-facing walls in Selma take direct afternoon sun, and the factory glazing seals on 7700 Series casements eventually break down. You’ll see fogging between the panes. This is a sash replacement, not a full-frame repair, in most cases.
- Hardware sag on PGT WinGuard sliding doors in newer homes still settling on clay. Selma sits on expansive clay, and homes built in the last five to ten years are still moving. Sliding door rollers bind and jump track when the frame shifts. We realign, replace rollers, and adjust the strike plates, and we’ll tell you honestly if the underlying slab movement is a bigger problem that needs a foundation contractor’s opinion.
- Rotted sill flashing under PGT aluminum windows near the Cibolo Creek floodplain. Older homes closer to the creek deal with moisture wicking behind the flange just above the slab. We see rotted flashing and sometimes rotted subsills. Repair means pulling the window, replacing the flashing and any damaged framing, and reinstalling with proper drainage. This is a fix we do correctly, not a caulk-and-paint cover-up.
- Storefront PGT WinGuard Aluminum damage on I-35 commercial builds. Light-commercial storefronts along the I-35 corridor take hits from hail, delivery trucks, and the occasional vehicle. We match bronze or silver aluminum finishes on single-unit replacements so you don’t end up with a mismatched wall of storefront glass.
PGT Service in Selma: What Local Conditions Mean for Your Equipment
Here’s what nobody tells you when you buy a PGT window in Selma: the soil under your home is as important as the glass in your frame. Selma sits on the Blackland Prairie, and the expansive clay soils shift with every wet-dry cycle. In neighborhoods like Olympia Hills, we regularly see differential settling that torques window frames and slider tracks. That settling is the reason a brand-new PGT WinGuard sliding door can start binding within three years. It’s not a PGT defect. It’s Selma’s ground moving underneath the house. The same clay that cracks driveways and sidewalks in this area also puts pressure on window frames, which is why we check the frame’s squareness and the slab’s movement pattern on every PGT service call, not just the glass and hardware. In the older homes near the Cibolo Creek floodplain, moisture compounds the issue, accelerating sill rot and flashing failure. This is the specific reality of PGT ownership in Selma, and it’s why a local crew that understands the soil beats a generic window installer every time.
PGT Models & Products We Service in Selma
We service the PGT product lines most common in Selma’s housing stock: WinGuard Vinyl in sliding and casement configurations, WinGuard Aluminum for porch enclosures and storefronts, the 5500 Series single-hung, and the 7700 Series casement. Our approach to parts is simple and consistent. We try PGT OEM glass packs, sashes, and hardware first, especially on WinGuard impact units, where an aftermarket glazing choice can void the design pressure rating. If a PGT sash is out of production with blown seals or pitted aluminum, we’ll quote both full-frame and sash-only options and explain the tradeoffs. We only recommend non-OEM parts for trim, screens, and exterior accessories that don’t affect the impact rating. We keep the most common PGT sash sizes and hardware kits in our local inventory so Selma service calls don’t wait on a long parts order.
For broader context on our PGT work across the region, see our PGT sales & service page.
See the difference
Before
After
Before
After
Before
AfterPGT Service Pricing in Selma
Here’s what PGT work costs in Selma, using the same price ranges we quote across the San Antonio market. These are honest ranges, not teaser prices.
| Service | Price Range |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
| Roof Repair | $400 – $1,800 |
What drives the cost in Selma specifically? The age of the home, whether the unit is a standard PGT window or an impact-rated WinGuard, whether HOA approval is needed for exterior work, and whether slab movement has compromised the frame itself. A free estimate from us includes on-site measurements, a written line-item quote, and a clear explanation of what needs fixing and what can wait. Call (254) 269-5071 to schedule yours.
Serving Selma, TX - Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – PGT Construction in Selma
In most cases, we can replace the sash rather than the entire window. When hailstorms hit Selma in spring, we frequently see shattered outer panes on older PGT WinGuard vinyl units where the inner laminated lite held. We measure the sash, order a direct-match PGT OEM replacement, and typically have the window weathertight again within a week. Full-frame replacement is only needed if the frame itself is damaged or the flashing has failed. Call (254) 269-5071 and we’ll assess it on-site.
Yes. Older homes near the Cibolo Creek floodplain deal with moisture that wicks behind the window flange just above the slab, and we regularly find rotted sill flashing and subsills on PGT aluminum windows in that area. The fix is pulling the window, replacing the damaged flashing and framing, and reinstalling with proper drainage. Ignoring it leads to water intrusion and interior damage. Call (254) 269-5071 for an inspection.
Probably. Master-planned communities in Selma, including Olympia Hills and other newer developments, commonly require HOA approval for exterior window changes, including impact windows if the frame profile changes. We’re familiar with these requirements and can help you assemble the paperwork, match the approved finish and style, and schedule work within the HOA’s exterior-work window. We’ll handle it so you don’t have to chase the board.
For a simple sash replacement or hardware fix, you’re looking at a few hundred dollars per window. A full-frame replacement with a new PGT 5500 Series single-hung usually runs between $4,500 and $15,000 depending on how many windows and the frame condition. If the frames are square and the flashing is sound, repair is usually the smarter spend. If the frames are racked from clay-slab movement, replacement may be the honest long-term call. Call (254) 269-5071 and we’ll give you a written line-item comparison for your specific windows.
Yes. We match PGT bronze and silver aluminum finishes on single-unit storefront replacements. The key is sourcing the exact PGT frame profile and finish code, which we do through our regional supplier. You won’t end up with one odd-colored storefront lite that announces there was damage. Call (254) 269-5071 with the building address and we’ll get a match.
Service Areas Near Selma
We serve Selma and the surrounding communities across the Northeast San Antonio corridor. That includes Selma service area, San Antonio, Cibolo, Leon Valley, and Terrell Hills. For PGT work specifically in nearby cities, see PGT service in San Antonio or PGT service in Boerne.
Book Your PGT Service in Selma Today
If you’ve got PGT windows, doors, or Selma Bathroom Remodeling needs, or storefront glass that needs attention in Selma, call us at (254) 269-5071. We’ll get you a written estimate, confirm who’s coming before they arrive, and make sure the work is covered for a full year. Know who’s coming, know what it costs, know it’s covered – that’s the whole job before the job starts.
Written by Isaac Pruett, Owner at Mason Remodeling Co San Antonio, serving Selma since 2004.
